Magnetic Assembly for Magnetic Formwork System
Introduction
Precast factories produce each ‘component’ of a building such as walls, floors, stairs, roofs and then construction workers put these components together to have a building. These walls, stares, roofs etc are produced on a steel table by concrete pouring into forms. Forms need to be fastened on steel table firmly and that is where shuttering magnets and recess former work.
Benefits Of Using Magnetic Assemblies In Precast
Traditional way to fasten forms onto the steel table is to insert pins into pre-drilled holes on both steel table and forms, with which the work runs with low efficiency as it requires quite a lot of labor in hole-drilling, setting the forms and disassembling forms from steel table afterwards. What's more, holes make both the steel table and forms less durable than they should be.
Formwork magnetsincluding precast magnet do not need holes and they offer an easy, quick approach in doing the work. For example, our shuttering magnets, coming in different models according to the holding force they create, can be attached on the steel table by just a press on the knob. In stead of taking out all the pins to remove the form, it takes much less time to lever up the knob to disassemble the shuttering magnet and then to remove the forms.
Features Of Magnetic Formwork Systems From Weizhong Mgnetics
We pay attention to details with continuous optimization engineering to make our shuttering magnets, recess formers, fixing plates more durable than our rival's. Our efforts has been approved by our customers in the form of repeated purchases and enlarged customer base. They enjoy our solid design, rugged reliability.
As a magnetic assembly manufacturer, we have the best custom magnetsfor sale, any need, contact us.
Send product request
Other supplier products
 |
Shuttering Magnet | Making a precast concrete formwork magnetincludes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots ... |
 |
Magnetic Assembly for Lifting/Holding | General info Most of our pot magnets, channel magnets —these series names are more about their shapes than applications —were well de... |
 |
Deep Pot Magnet | Different from other pot magnets at the first look, these deep pot magnet are actually designed, produced using the same principle. By using the st... |
 |
Shuttering Magnet | Making a precast concrete magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The... |
 |
Rubber coated super magnets | Rubber Coated Magnet or rubberised neodymium magnetsare best described by one concept, that is: rubber coated magnet is a perfect combination of fo... |
Same products
 |
Solid Impeder Cores Ferrite Rods soft magnetic material for Tube Welding of High Frequency Induction Increasing The Efficiency of Welding Process | Seller: 837294 | CRS solid fluted type:Features:It is characterized by a radial groove type, which can effectively... |
|
|
Hollow Impeder Cores Ferrite Rods soft magnetic material for Tube Welding of High Frequency Induction increasing the efficiency of welding process | Seller: 837294 | Ferrite Impeder Rods for tube welding: High Frequency Induction welding is the common process fo... |
 |
Rare Earth Permanent Round NdFeB Countersunk Magnet | Seller: Dongyang Ma Li Magnet Co., Ltd. | Rare Earth Permanent Round NdFeB Countersunk Magnet are made of NdFeB Ceramic Powder, which is th... |
 |
Pot Magnets With Countersunk(Screw) Hole | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | A compact magnet system consisting of a steel shell with high permeability and a countersunk magn... |
 |
Channel Magnets-Rectangular Mounting Pot Magnets | Seller: NingBo BeiLun Meank Magnetics Co.,ltd. | The magnet assembly composed of a U-shaped ferromagnetic iron shell and a rectangular magnet is c... |
