ASTM A333 Low Temperature Welded Steel Pipe
ASTM A333 standard specification for seamless and welded steel pipe for low-temperature service and other applications with required notch toughness.
This specification covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
ASTM A333 Low Temperature Welded Steel Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to nine different grades designated by numbers 1, 3, 4, 6, 7, 8, 9, 10, & 11. Discussed herein are Grades 1 and 6.
Sizes
1/4" Nominal to 24"O.D.
Wall Thickness – Schedule 10 through XXH
Mainly Grade：
Grade 1, Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10, Grade 11
Strike Temperature Condition:
*For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese. When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.
Scope:
ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
ASTM A333 Low Temperature Welded Steel Pipe005Jurbfzy7ku1XGB3b19
If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you.
Hot Tags: ASTM A333 low temperature welded steel pipe, China, factory, manufacturers, suppliers, customized, wholesale, bulk, discount, low price, in stock, free sample
Other supplier products
|
|
Welded Elbow Fitting |
Welding elbow fitting, it can be cut on the pipe or steel plate after welding, its specifications can be very large.The number of sections and radi... |
|
|
Cold Formed Welded Structural Hollow Sections |
OD:21-630mm
Wall thickness:3-40mm
Pipe Length: from 6 to 12 m.
Different lengths on request.
Pipe Ends: plain square-cut or bevelled ends for b... |
|
|
Rectangular Low Carbon Steel Pipe |
Grade :A53(A,B), A369, St37, St52, St42, ST35, Q235, Q345, Q195 Length :2-12meter Outer Diameter :20-400mm Thickness :0.8-13mm...
rectangular low ... |
|
|
90°Elbows Pipe Fittings 45° Elbows Pipe Fittings |
90°Elbows Pipe Fittings
A 90°elbow is a metal pipe fitting that changes the direction of the pipe on a carbon steel pipe. Connection mode ... |
|
|
3EP Coated Steel Tube |
3EP coated steel tube Generally used in municipal and major building water supply and drainage above, it is the outer wall coating high adhesion, i... |
All supplier products
Same products
