ASTM A516 / ASME SA516
ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service.
ASTM A516/A516M specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine austenitic grain size requirements. The mechanical properties such as tensile strength, yield strength, and elongation shall be determined by a tension test for the plates.
The sa 516 specification as follow:
|
Standard:ASTM A516/A516M |
|
Grade : ASTM A516 Gr 55, 60, 65, 70 |
|
Thickness : 8mm -260mm |
|
Width : 1000mm-4000mm |
|
Length : 1000mm-20000mm |
|
MOQ: 1 PC |
|
Product type : Steel plate |
|
Delivery time : Promptly ( Stock) or 10-40 days (Production) |
|
Stock : Available |
|
MTC: Available |
|
Delivery condition: As Rolled or Normalized |
We are a professional ASME SA516and A516 ASTMsteel stockist and supplier. We can supply different product type and grades of ASME SA516 . The sa 516 materialgrade is various, and the astm a516 gr70is the largest grade, know more detail please enter our website to download astm a516 pdf. If you have any need of ASME SA516 steelplease do not hesitate to contact us .
ASME SA516
ASME SA516 Grade 55
ASME SA516 Grade 60
ASME SA516 Grade 65
ASME SA516 Grade 70
ASTM A516 Grade 55
ASTM A516 Grade 60
ASTM A516 Grade 65
ASTM A516 Grade 70
Send product request
Other supplier products
 |
ASTM A515 / ASME SA515 | / ASME SA515 ASTM A515/A515M Standard Specification For Pressure Vessel Plates, Carbon Steel, For Intermediate-And Higher-Temperature Service ASTM ... |
|
|
ASTM A516 / ASME SA516 | ASTM A516/A516M Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower Temperature Service. ASTM A516/A516M specification c... |
 |
Angle Bar | Angle, the steel strip is perpendicular to each other on both sides into the corner. There are equilateral angle steel and unequal edge angle steel... |
 |
Square Or Rectangular Tube | A Hollow Structural Section, or HSS, is a type of metal with a hollow tubular section. These sections can be circular (CHS), square (SHS) or 2x3 re... |
|
|
ASTM A537 / ASME SA537 | ASTM A537 / ASME SA537 ASTM A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon SteeLASTM A537A537... |
Same products
 |
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... |
 |
Special Clearance 1.9" N80 NUE Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
DS55/HT55/HST55 4145h Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
X-over 3-7/8"CAS 2Cr13 Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
JFE BEAR Thread Type Super 13Cr Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
