PARTING AND GROOVING INSERT
Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter withdrawal groove, and the end face groove.
The groove shape includes the narrow, wide, and forming groove. There are deep grooving tools, including 1 mm grooving insert, radius grooving insert, etc.. The process features of these inserts are as follows:
1)There are one main cutting edge and two auxiliary cutting edges involved in three-dimensional cutting at the same time. The feed is small, cutting thickness is thin, the unit cutting force is increased, total cutting force and power consumption are large, the cutting heat is high, heat dissipation is poor, and the cutting temperature is high.
2)The cutting speed changes constantly in the process of machining, especially when parting, the cutting speed changes from maximum to zero.
3)As the workpiece rotates, the cutter cuts in continuously. In fact, the Archimedes spiral surface is formed on the workpiece surface. As a result, the actual front angle and back angle are constantly changing, making the process more complicated.
4)Due to the narrow width of the tool, relative hanging elongation, poor rigidity of the tool, easy to vibrate.
Betalent carbide insert parting toolare designed and manufactured considered above factors and are belong to high-level quality. The standard stock mainly includes the following three categories.
|
Model code |
S |
R |
La |
|
MGMN200-M |
2 |
2 |
|
|
MGMN250-M |
17 |
||
|
MGMN300-M |
3 |
17 |
|
|
MGMN400-M |
4 |
22 |
|
|
MGMN500-M |
5 |
22 |
|
|
MGMN600-M |
6 |
22 |
|
Model code |
S |
R |
La |
|
MRMN250-M |
17 |
||
|
MRMN300-M |
3 |
17 |
|
|
MRMN400-M |
40 |
2 |
21 |
|
MRMN500-M |
5 |
20 |
|
|
MRMN600-M |
6 |
3 |
19 |
Xiamen Betalent Carbide Co., Ltd is one of theprofessional carbide suppliers, focusing on designing, producing, and selling cemented carbide materials and carbide product.Betalent carbide factory has advanced facilities and inspection instruments, offers carbide products to the middle to the high-end market.
Send product request
Other supplier products
 |
WATER METER SHAFT | The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called... |
 |
CEMENTED CARBIDE | Cemented carbide materialis a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy pr... |
 |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cutting dia. 16mm Grade BT50 ... |
 |
COOLANT DRILL BITS | Betalent carbide coolant-through drill bits application and advantages: d Cutting dia.(mm) D Shank dia.(mm) Lc... |
 |
PCB DRILL BIT | PCB（Printed Circuit Board）, also called printed circuit board. It is glued together by several layers(4 layers, 6 layers or 8 layers) of resin mate... |
Same products
 |
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... |
 |
Special Clearance 1.9" N80 NUE Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
DS55/HT55/HST55 4145h Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
X-over 3-7/8"CAS 2Cr13 Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
JFE BEAR Thread Type Super 13Cr Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
