PARTING AND GROOVING INSERT
Parting and grooving inserts are inserts for cylinder parting and grooving, including to the outer circular, the inner hole groove, the cutter withdrawal groove, and the end face groove.
The groove shape includes the narrow, wide, and forming groove. There are deep grooving tools, including 1 mm grooving insert, radius grooving insert, etc.. The process features of these inserts are as follows:
1)There are one main cutting edge and two auxiliary cutting edges involved in three-dimensional cutting at the same time. The feed is small, cutting thickness is thin, the unit cutting force is increased, total cutting force and power consumption are large, the cutting heat is high, heat dissipation is poor, and the cutting temperature is high.
2)The cutting speed changes constantly in the process of machining, especially when parting, the cutting speed changes from maximum to zero.
3)As the workpiece rotates, the cutter cuts in continuously. In fact, the Archimedes spiral surface is formed on the workpiece surface. As a result, the actual front angle and back angle are constantly changing, making the process more complicated.
4)Due to the narrow width of the tool, relative hanging elongation, poor rigidity of the tool, easy to vibrate.
Betalent carbide insert parting toolare designed and manufactured considered above factors and are belong to high-level quality. The standard stock mainly includes the following three categories.
|
Model code |
S |
R |
La |
|
MGMN200-M |
2 |
2 |
|
|
MGMN250-M |
17 |
||
|
MGMN300-M |
3 |
17 |
|
|
MGMN400-M |
4 |
22 |
|
|
MGMN500-M |
5 |
22 |
|
|
MGMN600-M |
6 |
22 |
|
Model code |
S |
R |
La |
|
MRMN250-M |
17 |
||
|
MRMN300-M |
3 |
17 |
|
|
MRMN400-M |
40 |
2 |
21 |
|
MRMN500-M |
5 |
20 |
|
|
MRMN600-M |
6 |
3 |
19 |
Xiamen Betalent Carbide Co., Ltd is one of theprofessional carbide suppliers, focusing on designing, producing, and selling cemented carbide materials and carbide product.Betalent carbide factory has advanced facilities and inspection instruments, offers carbide products to the middle to the high-end market.
在线联系供应商
Other supplier products
 |
CARBIDE ROLLER | Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer end mill: A suitable negative front angle design is adopted, which takes into account the edge stren... |
 |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... |
 |
COLD HEADING DIE CORE NUT DIE | The cold headingdie bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required ... |
 |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... |
Same products
 |
Cleaning Agent | 卖方: Foshan Jiwei New Material Co.,Ltd | Cleaning Agent PUR cleaning agentis a specialized solution designed for effectively removing pol... |
 |
3D Laminating Water-Based Polyurethane Adhesive | 卖方: Foshan Jiwei New Material Co.,Ltd | 3D Laminating Water-Based Polyurethane Adhesive 3D laminating water-based polyurethane adhesivei... |
 |
Liquild PUR Adhesive | 卖方: Foshan Jiwei New Material Co.,Ltd | Liquild PUR Adhesive PUR adhesive, also known as polyurethane reactive adhesive or polyurethane ... |
 |
PUR for Edge Banding | 卖方: Foshan Jiwei New Material Co.,Ltd | PUR for Edge Banding Edge banding adhesiveis a type of glue used in furniture manufacturing and ... |
 |
PUR for Flat Lamination | 卖方: Foshan Jiwei New Material Co.,Ltd | PUR for Flat Lamination Our PUR (Polyurethane Reactive) adhesive is specially formulated for fla... |
