Steel Pellet

• 

Description and Production procedure of Steel Pellet

Pellets are small balls of iron ore used in steel production. They are one of the important sources of iron in the manufacture of steel. Pellet production is the basis of the steel production process. Steel pelletsare made from iron ore powder with additives such as limestone, dolomite, olivine and binder bentonite. The addition of these additives and adhesives, in addition to preventing a large amount of gas produced by the evaporation of water from tending to rupture during the initial stage of heating, can also increase the strength of the particles before heating. The mixture is then mixed together in a mixer and fed into a disk or drum to produce coarse particles, usually about 9-16mm. Heat treatment of coarse particles, including drying, preheating, roasting, post-firing and cooling, is performed to obtain high metallurgical resistance and appropriate properties. The original particles are first fed into the hardening machine. Both the direct grate and the grate-kiln dried the particles in the dry zone, then heated the particles to about 800-900°C in the preheating zone, and then hardened at temperatures of about 1200 to 1350°C. The pellet is then cooled to a suitable temperature for transportation to the unloading equipment.

Application of Steel Pellet

Pellets are widely used in the iron and steel industry. Nothing can replace them. The structure of the iron ore pellets in the blast furnace allows air to flow between the pellets, which reduces the air resistance that passes up the charge layer during smelting. In addition, pellets provide advantages for end users, such as increased productivity of blast furnaces, increased opportunities for iron content in charging, and better environmental performance compared to sintering plants.

As there is a global decline in high-grade block minerals, pellets are made from low-grade ores and are therefore relatively inexpensive and suitable for mass production. Their uniform particle size can ensure good permeability of blast furnace charge, and they have high voltage, good reducibility, high cold strength, and easy to transport and storage, not crack. Pellets contain fewer harmful elements, and they can also expand the source of raw materials for iron-making and smelting fuels.

Main Content Data of Steel Pellet

Huaro Steel is a professional stainless steel raw material supplier, we provide cold rolled steel plate, sponge iron pellets, iron oxide pellets, iron pellets, iron ore pellets for saleand etc. Want to know more? Please contact us.

Other supplier products

	Cold Rolled Steel Sheet	Description of Cold Rolled Sheet The cold rolled sheet is manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemically and pr...
	Other Raw Material	There are many different types of raw materials(such as hbi iron ore)that HUARO handles.HUAROis a hbi plantin China.With reliable resources we prov...
	Steel Billet	As a reliable and professional steel raw material suppiler, Huaruo aims to manufacture the best quality steel productsto satisfy various needs of t...
	Cold Rolled Coil	Description ofCold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot roll...
	Hot Briquetted Iron (HBI Iron)	Definition of HBI Plant Hot Briquetted Iron, known as HBI or HBI iron , is a premium form of Direct Reduced Iron (DRI).As a supplement for pig iron...

Same products

	Steel Press Fittings Coupling	Seller: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Features: Product Variety: Coupling (DDS Coupling ),Long coupling ,Reducer Coupling Size：DN20-D...
	SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC	Seller: Tianjin Wenxin Energy Technology Co.,LTD	Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing...
	Special Clearance 1.9" N80 NUE Tubing Coupling	Seller: Tianjin Wenxin Energy Technology Co.,LTD	Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
	DS55/HT55/HST55 4145h Crossover	Seller: Tianjin Wenxin Energy Technology Co.,LTD	Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
	X-over 3-7/8"CAS 2Cr13 Crossover	Seller: Tianjin Wenxin Energy Technology Co.,LTD	Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...