.

Steel Pellet

Description and Production procedure of Steel Pellet

Pellets are small balls of iron ore used in steel production. They are one of the important sources of iron in the manufacture of steel. Pellet production is the basis of the steel production process. Steel pelletsare made from iron ore powder with additives such as limestone, dolomite, olivine and binder bentonite. The addition of these additives and adhesives, in addition to preventing a large amount of gas produced by the evaporation of water from tending to rupture during the initial stage of heating, can also increase the strength of the particles before heating. The mixture is then mixed together in a mixer and fed into a disk or drum to produce coarse particles, usually about 9-16mm. Heat treatment of coarse particles, including drying, preheating, roasting, post-firing and cooling, is performed to obtain high metallurgical resistance and appropriate properties. The original particles are first fed into the hardening machine. Both the direct grate and the grate-kiln dried the particles in the dry zone, then heated the particles to about 800-900°C in the preheating zone, and then hardened at temperatures of about 1200 to 1350°C. The pellet is then cooled to a suitable temperature for transportation to the unloading equipment.

Application of Steel Pellet

Pellets are widely used in the iron and steel industry. Nothing can replace them. The structure of the iron ore pellets in the blast furnace allows air to flow between the pellets, which reduces the air resistance that passes up the charge layer during smelting. In addition, pellets provide advantages for end users, such as increased productivity of blast furnaces, increased opportunities for iron content in charging, and better environmental performance compared to sintering plants.

As there is a global decline in high-grade block minerals, pellets are made from low-grade ores and are therefore relatively inexpensive and suitable for mass production. Their uniform particle size can ensure good permeability of blast furnace charge, and they have high voltage, good reducibility, high cold strength, and easy to transport and storage, not crack. Pellets contain fewer harmful elements, and they can also expand the source of raw materials for iron-making and smelting fuels.

Main Content Data of Steel Pellet

Chemical Composition

Size

Physical Property

Fe (t): 66 8%Min

8-16mm: 85% Min

CCS:300 Kg/ P Min

FeO: 0.4% Max

Under 8 mm: 5% Max

  1. :5% Max

SiO2+AL2O3:2.5% Max

+16 mm:10。/0 Max

Porosity:≥24

P:0.02% Max

S:0.01 % Max

Huaro Steel is a professional stainless steel raw material supplier, we provide cold rolled steel plate, sponge iron pellets, iron oxide pellets, iron pellets, iron ore pellets for saleand etc. Want to know more? Please contact us.



Отправить запрос, связаться с поставщиком

Кому: huaro-shanghai
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Cold Rolled Steel Strip
Cold Rolled Steel Strip Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled stee...
Steel Making Raw Material
Steel Making Raw Material Steel Making Raw Material Iron Ore Iron Ore Concentrate Direct Reduced Iron (DRI Steel) Steel Pellet Hot Briquetted Iron (HBI Iron) Description of...
Prepainted Galvanized Steel Coil
Prepainted Galvanized Steel Coil General Description of Prepainted Galvanized SteelCoil Pre-coated coil is a product obtained by chemical surface treatment (coating) of hot-dipped ...
Steel Pellet
Steel Pellet Description and Production procedure of Steel Pellet Pellets are small balls of iron ore used in steel production. They are one of the important so...
Galvanized Steel Sheet
Galvanized Steel Sheet Description of Galvanized Rolled Steel Hot dipped china galvanized steel sheetis a carbon steel sheet coated with zinc on both sides through a cont...
Все товары поставщика

Похожие товары

V-shore Frame
V-shore Frame Продавец: Suzhou TECON Construction Technology Co., Ltd V-Shore Frame Scaffolding is a high load conventional shoring system consisting of three major co...
Timber Formwork
Timber Formwork Продавец: Suzhou TECON Construction Technology Co., Ltd TECON Timber formworkmainly includes BASE 20 Wall Formwork, Flex 20 Slab Formwork, Slab Table For...
TECON-Form Plastic Board
TECON-Form Plastic Board Продавец: Suzhou TECON Construction Technology Co., Ltd TECON-Form Plastic Board series consists of Cellular Board, Plas-film Board and high end Plas-tec...
TECON-Form Film Faced Plywood
TECON-Form Film Faced Plywood Продавец: Suzhou TECON Construction Technology Co., Ltd TECON-Form Film Faced Plywood series ranges from Poplar, Hardwood, Birch and Birch X-life, offeri...
Steel Formwork
Steel Formwork Продавец: Suzhou TECON Construction Technology Co., Ltd TECON Steel formworkmainly contains Steel LITE Formwork, HETO Frame Wall Formwork, Steel Deck Sla...