SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance and antiknock performance.
The Specification of SDS-07560 0.75mm Diameter 60mm Length Hooked Fiber
|
Name |
SD-07560 |
|
Type |
Loose |
|
Diameter |
|
|
Length |
60mm |
|
L/D(length/diameter) |
80 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
High crack resistance to retard crack development;
Good anti-seepage and moisture-proof performance;
High tensile strength, flexural strength and good impact resistance;
Wear resistance, fatigue resistance, durability and corrosion resistance;
Hooked end steel fiber provides high bending resistance and toughness;
High strength, high rigidity and strong shear resistance
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturerthat can offer a wide range of steel fibre types that meets different needs.
Packaging:20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
Send product request
Other supplier products
 |
SDS Micro Copper Coated Steel Fiber | Micro brass fibers are made of copper coated steel wire , which is the most important materials of RPC and UHPC. UHPC has the features of very high... |
 |
SDS Micro Copper Coated Steel Fiber | Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high ... |
|
|
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... |
 |
Steel Fiber Solutions | Concrete Fiber Solutions Steel Fibers For Crack Control The steel fiber has high tensile strength of 1000Mpa, which could ensure it will not be br... |
 |
SDS Glued Hooked End Steel Fiber | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiberin bulked could make sure it has good dispersibility in ... |
Same products
 |
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... |
 |
Special Clearance 1.9" N80 NUE Tubing Coupling | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
DS55/HT55/HST55 4145h Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
X-over 3-7/8"CAS 2Cr13 Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
JFE BEAR Thread Type Super 13Cr Crossover | Seller: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
