Stainless steel Cathode plate
(1) The stainless steel cathode plate allows operation at a high current density of 280 to 360 A / m2, which is higher than the conventional current density (240 to 260 A / m2).
(2) high current efficiency, up to 96 ~ 99%, higher than the current process current efficiency (95 ~ 96%);
(3) the tank voltage is low, 0.24 ~ 0.30V;
(4) stainless steel cathode plate cathode plate in the actual electrolyte has excellent corrosion resistance, cathode plate service life of 15 years (accelerated experimental conversion).
(5) stainless steel cathode plate flatness: conductive beam ≤ 3 mm, the upper part of the board ≤ ± 3 mm, plate middle and lower ≤ ± 3.5 mm; vertical plate ≤ ± 4.5 mm.
(6) stainless steel cathode plate surface finish: 2B; stainless steel cathode plate material: 316L or dual-phase steel.
(7) stainless steel cathode plate bottom V-groove, angle of 90 degrees.
Other supplier products
|
|
Baffle bag in Packing Bags |
Woven Polypropylene FIBC Bulk Storage Bags with the unique advantage.It's widely used in many different branches of industry. |
|
|
PET strapping tape for pack |
Polyester Material Pet Strapping Roll Bale For PackagingWith the unique advance, Pet strap is widely used in many different branches of industry, s... |
|
|
Custmized PP FIBC bag bulk storage bag |
PP FIBC bag with the unique advantage.It's widely used in many different branches of industry. |
|
|
Copper refining using cathode plate |
Permanent stainless steel cathode plate is widely used in Sn/Cu/Ni electrowinning.
The plates use 316L stainless steel,2B surface handing.
Our sta... |
|
|
PP bulk bag for packing |
Woven Polypropylene FIBC Bulk Storage Bags with the unique advantage.It's widely used in many different branches of industry. |
All supplier products
Same products
