.

Heavy Gauge Cut To Length Lines

is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to length and blanking. RISHBIN supply full range of cut to length line China according to client’s special requirement by combining different component. Every CTL line is engineered and constructed differently for customers, it is customized designed and built, it is considered when choosing a right CTL line about some specifics like production capacity, running speed, material thickness and width, etc. Quality and standard checks are strictly performed on our product before releasing to our valued customers.
Available raw material for cut to length line is hot rolled steel, cold rolled steel, galvanized steel, pre-painted steel, high tensile steel, stainless steel, aluminum, copper, alloys.
The whole line consists of coil car, double support uncoiler, hydraulic pressing and guiding side device, shovel head, pre-leveler, high precision leveler, cut to length machine, stacker, electric control system, hydraulic system, etc. as well as pendulum middle plate and steering device.
Main Technical Parameters of Heavy Gauge Cut To Length Lines
1.Coil properties: δs≤550MPa, δb≤600MPa
2.Coil thickness: 8mm-25mm
3.Coil width: Max. 2500mm
4.Coil I.D: 508 mm
5.Coil O.D: Max. 2500 mm
6.Coil weight: 40000 kg
7.Line speed: 0-25 m/min
8.Leveler shaft diameter: 260 mm
9.Leveler rollers quantity: 9
10.Cutting length: 800-12000 mm
11.Cutting rate: 8 pieces/min
12.Length tolerance: ±1 mm
13.Diagonal tolerance: ±2 mm
14.Straightening tolerance: ±2 mm/m2
15.Total power: about 250 KW
16.Total weight: about 80 T
RISHBIN heavy gauge cut to length lines are built for speed and ease of use and can produce higher line speeds without experiencing material slippage. Cut-To-Length Line and Blanking Line will make your job easier, cut costs, and increase your profits.
The lines can be supplied with start-stop shears, flying shears. For start stop shear, the sheet is stopped for each cut of the shear. They can cut a variety of lengths and thicknesses. Electric controls are used to stop the leveler drive after the required length has been fed through the shear and to initiate shear action, then the subsequent feeding of the sheared length to the stacker. For flying shear, it’s a high production solution
Here is working process:
Steel coils are transferred by an entry coil car and loaded onto an uncoiler. From uncoiler the strip proceeds through a five-high precision leveler designed to level steel within the desired material gauge range and yield strength. The strip then proceeds through a squaring unit and precision roll-feed unit to the high speed shear, where it is cut to required length. The cut sheet then moves to float sheet stacker where it is stacked on a pallet and is then moved onto the semiautomatic packaging line for wrapping.
Benefits of RISHBIN Cut to Length lines
  • Minimal tooling preparations and higher productivity rates
  • Energy efficient
  • Reduced operating costs
  • High in speed and strength
  • High input and output rates
  • Extreme sheet flatness due to high precision levelers
  • Exact cutting accuracy

Type

RS20×2500

RS25×2500

Thickness Range

(mm)

6-20

8-25

Width Range

(mm)

2500

2500

Cutting Length

(mm)

800-12000

800-12000

Cutting Precision

(mm)

±1

±1

Roller Numbers

9

9

Roller Diameter

Ф230

Ф260

Coil ID

Linear Speed

Ф610&760m

0~25m/min

Ф610&760mm

0~25m/min



Send product request

To: RISHBIN CO., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Stainless Steel Slitting Machine
Stainless Steel Slitting Machine Based on much experiences on providing quality, cost-effective and long lasting roll forming systems Classification and Characteristics of Stainl...
Heavy Gauge Cut To Length Lines
Heavy Gauge Cut To Length Lines is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to lengt...
Heavy Gauge Slitting Lines
Heavy Gauge Slitting Lines RISHBIN Heavy Gauge Slitters are designed to slit high strength heavy gauge materials. Coils max. thickness of up to 20mm, max. width of up to 2500...
Light Gauge Cut To Length Lines
Light Gauge Cut To Length Lines is a high efficient metal processing production line for cutting metal flat sheet from metal coils. The metal coils unwind, leveled, cut to lengt...
Type of Flying Shearing Machine
Type of Flying Shearing Machine Mechanical flying shear is mainly used for rapid shearing processing equipment of metal plates. The following Rishbin machinery will tell you abou...
All supplier products

Same products

Stainless Steel Round Bar
Stainless Steel Round Bar Seller: United Stainless LLP We are one of the leading manufacturers of stainless steel 304 round bars, ss 304 round bars, 304...
API 5L X65 PSL1/PSL 2 LSAW Carbon Steel Pipe
API 5L X65 PSL1/PSL 2 LSAW Carbon Steel Pipe Seller: Cangzhou Botop International Co., Ltd Standard: API Spec 5L API Spec 5L specifies requirements for the manufacture of two product spec...
Welding Stainless Steel Wire Mesh Basket
Welding Stainless Steel Wire Mesh Basket Seller: Hebei Yuanlv Filter Equipment Co., Ltd. Stainless steel electric welding/high-temperature resistant metal cleaning basket /medical disinf...
Hot rolled steel channel european standard U channel for construction use
Hot rolled steel channel european standard U channel for construction use Seller: HGB Industrial Group Hot rolled steel channel european standard U channel for construction use Product name:Hot rolled...
Carbon Steel Flat Bar From Factory Directly
Carbon Steel Flat Bar From Factory Directly Seller: HGB Industrial Group Carbon Steel Flat BarFrom Factory Directly Grade: Q235 Thickness: 1.8mm Width: 100mm Length: 6m A...