SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
This fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. It can be widely used on roads, highways, curbs, factory floors, airport runways and etc.
The Specification of SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
|
Name |
SD-07535 |
|
Type |
Loose |
|
Diameter |
|
|
Length |
35mm |
|
L/D(length/diameter) |
46 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-07535 0.75mm Diameter SDS 35mmLength Hooked End Steel Fiber
Under the same strength, the amount of concrete can be reduced;
Product life is prolonged;
High comprehensive;
Reduce steel reinforcement requirements;
Hooked steel fibercan reduce crack widths and control the crack widths tightly, and also improving durability.
USER'S GUIDANCE
Dosage: depend on the application and minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber reinforced concrete supplierthat can offer a wide range of steel fibre types that meets different needs.
Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet, 24tons per 20'container.
And the pallets should be waterproof, don't stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
Send product request
Other supplier products
 |
SDS Loose Hooked End Steel Fiber | Hooked end steel fibresare made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance... |
 |
SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber | The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times cont... |
 |
Steel Fiber For Fatigue Resistance | Fatigue resistance of steel fiber compared with ordinary concrete, the flexural and compressive fatigue properties of steel fiber reinforcedconcret... |
 |
Steel Fibers For Crack Control | Steel Fibers For Crack Control Why we use steel fiber for cracking control? The steel fiber has a high tensile strength of 1000Mpa, which could... |
 |
SDS-07560 0.75mm Diameter 60mm Length Hooked End Steel Fiber | This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for gl... |
Same products
 |
Square type single Nut | Seller: SCREW TECHNOLOGY CO., LIMITED | Square type single Nut The Square Nut is finished with a large mounting face paraller to the N... |
 |
Syringe Pumps / Piston Pumps | Seller: SHENZHEN KEYTO FLUID CONTROL CO., LTD. | 50XX series syringe piston pumpis a piston pump with high precision independently developed by Ke... |
 |
Rotary Shear Valves | Seller: SHENZHEN KEYTO FLUID CONTROL CO., LTD. | Keyto multi-channel rotary shear valvecan be categorized into long lifetime model and regular mod... |
 |
Programmable Syringe Pumps | Seller: SHENZHEN KEYTO FLUID CONTROL CO., LTD. | The programmable syringe pumpis a precision dispensing component developed by Keyto, with the pri... |
 |
Pinch Valves | Seller: SHENZHEN KEYTO FLUID CONTROL CO., LTD. | Pinch Valve is made up of two parts: the upper side is the body, and the lower side is the connec... |
