thermal transfer ribbon Red Ribbon
It is Red wax resin ribbon for various labeling application on all flat-head printers,Website:, like, Valentin, Datamax, Eltron, CAB, Toshiba, Intermec, Sato, Zebra, Argox, Godex, TSC, Citizen etc.PERFORMANCE PROPERTIES•Good label versatility for labels printing•Higher heat resistance up to 120°C•Superior smear resistance•Low Static electricity & ink flaking problemsTYPICAL APPLICATION•Logistics, Shipping, Flexible Package & Parcel labels•Product ID and Retail tags •Inventory, Storage & Number plates•Direct Food Contact•Health Care•Multipurpose LabelsRECOMMENDED LABEL STOCK•Uncoated and Gloss & matt Coated papers•Polyethylene, polypropylene, polyvinylchloride•PlasticRIBBON SPECIFICATION•Anti-smear Wax resin ribbon, used for flat head printer•Base Film Thickness: 4.5 ± 0.4µ•Ink Thickness: 3.0 ± 0.2µ•Total Thickness: < 9.0µ•Ink Color: Red, Green, Blue•Transmission density: 1.0 Mini•Tearing resistance: >200N/mm²•Friction coefficient:<0.035 STORAGE CONDITIONS•0°C TO 40°C •Humidity: 30 to 85 % RHPRING PROPERTY PaperCoated PaperPETPPPEPVCCompatibilityPPPPPPImage Density1.562.031.971.822.152.00Note:1)Smoothness Bekk for paper family must be over 200s2)Maximum printing speed: 10IPS3)Image Resolution for Paper & Film:Minimum Size:- For the line: 0.1mm- For the characters: 1.0mmDURABILITY OF PRINTED IMAGE•Smear + heat (50°C): ANSI > BTest Condition: Smear with cardboard (weight 1kg – 50 back and forwards) •Heat (120°C): No ink on the cotton fabric Test condition: Heat gradient 3,6kgF/cm² •Scratch: ANSI > B Test Condition: 50 back and forwards with a rub tester •Light: ANSI A Test Condition: Xenon lamp at 650W/m² •Water: ANSI A Test Condition: 24 hours in waterDURABILITY OF PRINTED IMAGENote: 5 refers to good with no damage, 0 refers to bad.
Other supplier products
All supplier products
Same products
