.

Pneumatic Wire Stripping Machine

Pneumatic Wire Stripping Machine

  • BJ-0320 Magnetic Pneumatic Wire Stripping Machine

    * Cable cross section: 0.03 – 2.08 mm² (32 – 14 AWG)
    * Max. cable outer diameter: 3.2 mm (0.12")
    * Stripping accuracy (whole strip): 1 mm (0.019")
    * Stripping accuracy (part of strip): 2 mm (0.078")
    * Wire diameter accuracy: 0.01 mm (0.001")
  • BJ-316 Double Layers Pneumatic Wire Stripping Machine

    *Stripping Length(Outside layer):8-100mm
    *Stripping Length(Inside layer):1.5-20mm
    *Stripping Capacity(Outside diameter):Max.2-8mm
    *Power Supply:AC 110V/60Hz 220V/50Hz
  • BJ-BHT2 Pneumatic Flat Sheathed Cable Stripper Machine

    * Display Way: Digital Display (LCD Display)
    * Wire Size: AWG10-32#
    * Fitting Wire Section Acreage: 0.1-4.5mm²( AWG10#-AWG32#)
    * Guide Pipe Diameter (Wire DIA.): Flat
    * Stripping Length: Head: 0-150 mm End: 0-80mm
  • BJ-330 Pneumatic Wire Stripping Machine

    * stripping length: 330mm
    * stripping capacity: max. 20mm
    * inlet air working pressure: 5-8 kg/cm2
    * stripping force: 49~115kg
    * capacity: 50
  • BJ-305 Pneumatic Wire Stripping Machine

    * stripping length: 50mm
    * stripping capacity: max. 5mm
    * inlet air working pressure: 3-7 kg/cm2
    * stripping force: 31~37kg
    * capacity: 40
  • BJ-310 Pneumatic Cable Stripper Machine

    * stripping length: 100mm
    * stripping capacity: max. 15mm
    * inlet air working pressure: 3-7 kg/cm2
    * stripping force: 49~115kg
    * capacity: 50
  • BJ-315 Pneumatic Wire And Cable Stripper Machine

    * stripping length: 150mm
    * stripping capacity: max. 15mm
    * inlet air working pressure: 3-7 kg/cm2
    * stripping force: 49~115kg
    * capacity: 50
  • BJ-HT2 Automatic Jacketed Cable Stripping Machine

    * Wire Size: AWG10-32#
    *Fitting Wire Section Acreage: 0.2-10mm²( AWG8#-AWG32#)
    *Guide Pipe Diameter (Wire DIA.): ¢13
    *Stripping Length: Head: 0-250mm End: 0-150mm
    *Cutting Length: 5mm-100m
  • BJ-3F Pneumatic Cable Stripping Machine

    * Max. stripping length: 20mm
    * Available wire size: AWG18-32
    * Max. step length: 20mm
    * Air Pressure: 5-7kgs
    * Power supply: AC110V/220V 50/60Hz
  • BJ-4F Pneumatic Wire Stripper

    * Max. stripping length: 20mm
    * Available wire size: AWG18-32
    * Max. step length: 20mm
    * Air Pressure: 5-7kgs
    * Power supply: AC110V/220V 50/60Hz

The understanding of the application and adjustment of pneumatic wire stripping machine.

Pneumatic wire stripper machine is Bo Jin specialized for processing line, electronic wire, cable core and double lines such as the development of semi-automatic stripping equipment (tail), with versatility, easy operation, and mainly powered by gas.

Application of pneumatic wire stripping machine.

1. The machine uses the pneumatic operation, and the solenoid valve is controlled.
2. The distance between the knife and the holder is short, which makes it easy to handle the computer line or particularly short wire.
3. Generally, treatment of the semi-stripping, the end of the whole strip is fast.

Adjustment of pneumatic wire stripper machine.

1. Connect the intake-tube to the air supply.

2. Plug the power cord into the power supply.

3. Step on the footswitch to make the cylinder move.

4. As shown in the figure, two fine-tuning nuts are the key to operation: loosen the grub screw in the middle of the nuts. Nut 1 controls the up and down of the clamp block; nut 2 controls the up and down of the knife die. For the thickness of different wire, the nut upward (counterclockwise) is tight, downward (clockwise) is loose.

5. Debugging OK to lock it in the middle of a grub screw, namely the rear master cylinder for pull cylinder, stroke adjusting nut for adjusting cylinder stroke, forward the more short stroke (e.g., half strip). It is longer, the back skin adjusts OK for the fixed nut lock. The two adjusting valves on the cylinder are adjusted and peeled respectively. The speed of return should be moderate enough to be used normally.

6. The use of the double-blade model is basically the same as the above. It is designed for the wire to be cut and formed once. The following points should be noted:

a) The clearance between the cutting knife and the peeling knife is 1.5mm without the gasket.

b) When it is adding or reducing gaskets, please pay attention to the consistency of the upper and lower thickness, so as to avoid the collision and damage of the die.

c) According to the strip length increase and decrease the gaskets, if the peel is 3.0mm installing a 1.5mm gasket, then 1.5+1.5=3.0mm.

d) When the peeling is longer, the cutter can be removed, and it can be used as a single knife. The length of the peeling is controlled by the line block.


Contact Info

  • 11th Floor, Jingzuan Building, NO. 875 Xiaolin Road, Kunshan, Jiangsu, P.R.C.
  • Phone:
  • Web:


Send product request

To: KUNSHAN BOJIN TRADING CO.,LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Multiple Wire Stripping And Twisting Machine BJ-4FN
Multiple Wire Stripping And Twisting Machine BJ-4FN Features ofMultiple Wire Stripping And Twisting Machine BJ-4FN The machine is suitable for line to coarse computer peripheral cable, tele line, ...
AL-505 SERIES Label Dispensing Machine
AL-505 SERIES Label Dispensing Machine Operation Video ofAL-505 SERIES Label Dispensing Machine Features of AL-505 SERIES Label Dispensing Machine Ideal for small labels and small ...
Label Cutting Machine
Label Cutting Machine Description ofLabel Cutting Machine With Cold & Hot Cutting BJ-07N Model: BJ-07N with Memory Knife: Hot & Cold cutting CUT LENGTH (mm)...
Coaxial Wire Stripping Machine
Coaxial Wire Stripping Machine Coaxial Wire Stripping Machine BJ-06TZ Automatic Coaxial Cable Cutting And Stripping Machine * Cable Type: coaxial-cable* Memory: 4...
BJ-08T Wire Twisting Machine
BJ-08T Wire Twisting Machine Product features ofWire Twisting Machine BJ-08T Axis design, while standing! Greatly improve production efficiency LCD backlit display, modern ...
All supplier products

Same products

SEC-100K Automatic Volumetric Dispensing Machine
SEC-100K Automatic Volumetric Dispensing Machine Seller: Shenzhen Second Intelligent Equipment Co., Ltd. SEC-100K Machine performance Adopt digital vision system to quickly capture the reference point...
BJ-1200 Pneumatic Crimping Machine
BJ-1200 Pneumatic Crimping Machine Seller: KUNSHAN BOJIN TRADING CO.,LTD. Specification ofBJ-1200 Pneumatic Crimping Machine Model: BJ-1200 Crimping range: non-insulat...
AL-937B Auto Label Rewinder
AL-937B Auto Label Rewinder Seller: KUNSHAN BOJIN TRADING CO.,LTD. Features ofAL-937B Auto Label Rewinder Label winding machine Automatic speed sync and tensi...
Pneumatic Wire Stripping Machine
Pneumatic Wire Stripping Machine Seller: KUNSHAN BOJIN TRADING CO.,LTD. Pneumatic Wire Stripping Machine BJ-0320 Magnetic Pneumatic Wire Stripping Machine * ...
BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine
BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Seller: KUNSHAN BOJIN TRADING CO.,LTD. Technical parameters ofBJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Typ...