O RING MECHANICAL SEALS
O-rings are one of the most frequently used products in sealing applications, relatively inexpensive and reliable. O-rings come in many styles and shapes. The material required depends on temperature, pressure, chemical, and other environmental factors. Materials such as EPDM, Nitrile, Buna-N, Viton, FFKM are the most common materials that we supply. Applications range from garden hose couplings to critical aerospace or chemical plant duties.
Types of O Ring Mechanical Seal for Sale
As a china o ring supplier, we supply all standard types of materials in a range of Shore Hardnesses and colours. In addition to standard imperial and metric sizes, Sealcon also supply a wide variety of non-standard sizes. Please feel free to inquire us if you need any O-rings. Materials include; Nitrile, Silicone, EPDM, FKM, Viton, FFKM, and HNBR.
Application of O Seal Ring Mechanical
O-ring is mainly used in the fluid static application (For example, water, oil, air, chemicals solvent, chemicals, etc.).
The temperature range is from -60 ℃ up to 220 ℃.
The pressure in the static application should be less than 20MPa, which varies with different materials.
Sometimes O-ring is used in the dynamic application with the pressure less than 5MPa and also used in semiconductor vacuum seal.
Advantages of O Ring Mechanical Seals
Cost-effective
Reliable
Versatile
O Ring Seal Material
O-rings come in many styles and shapes. The o ring seal material required depends on temperature, pressure, chemical, and other environmental factors. The o ring material selection such as EPDM, Nitrile, Buna-N, Viton, FFKM are the most common materials that we supply. Applications range from garden hose couplings to critical aerospace or chemical plant duties.
Common Elastomer Materials of O Mechanical Seal Pumping Ring
Buna-N(NBR)
Buna-nitrile is the most common elastomer used in mechanical seals. Depending on the exact compound, Buna is good for moderate temperatures, from about -35 °F to about 250 °F. Buna's chemical resistance is narrow, and it is used mostly for water-based applications. Buna is the lowest cost elastomer used in mechanical seals.
Fluoroelastomer (Viton/FKM)
Fluoroelastomers (Viton) offer the best all-around chemical resistance value for mechanical seal applications. Fluoroelastomers can be used at continuous temperatures up to 400 °F. There are some applications — such as steam — and some specific chemicals — such as organic acids and ketones — where EPDM or Kalrez® are specified. While much more expensive than Buna, Viton is still moderately priced.
Ethylene Propylene(EPDM)
Ethylene propylene (EPDM) offers outstanding performance in steam and hot water. There are also specific chemical applications where EPDM is the best choice. EPDM is recommended for use up to 300 °F. EPDM is often priced between Buna and Viton.
Perfluorocarbon (FFKM)
FFKM offers excellent resistance to chemicals and extreme temperatures. Special compounds can operate beyond 300°C. FFKM is resistant to most chemicals including inorganic acids, alkalines, ketones, esters, alcohols, fuels, and hot water. It is ideal for applications in aggressive chemical environments.
Our Standard FFKM compound has outstanding heat resistance with service temperatures of -10°C to 310°C. Hangzhou Sealcon Fluid Machinery Co., Ltdcan offer direct equivalents to Kalrez, Simrez, Perlast, Chemraz, grades.
Aflas
Aflas is a specialty, non-conventional fluoroelastomer. A cousin of Viton, it offers higher heat resistance and performs well in high concentrations of acids, oxidants, and alkalis. Aflas is usually somewhat more expensive than Viton.
Kalrez
Kalrez is usually the most expensive elastomer option available. With specialty compounds available for use with nearly any chemical, and the ability to withstand temperatures up to 600 °F, Kalrez is an amazing elastomer. O-rings often cost hundreds of dollars each, so Kalrez is only used where absolutely necessary.
Specialty Elastomers
There are a variety of specialty elastomers on the market, most of which compete with one of the above materials. Sometimes these are specified by a seal or pump OEM, and Infinity Pump can source these materials for you.
We can offer kinds of china rubber sealfor sale, if you have needs, please contact us.
Send product request
Other supplier products
O.E.M MECHANICAL SEALS | With mechanical seal factory, Sealconis able to design and manufacture a wide range of OEM mechanical seals. Our aim is to improve product quality ... | |
Flygt Mechanical Seals FOL-45 | Replacement for: FOL 45lower parts for flygt 3140, 3152 pump FOL-45 lower parts for flygt 4650, flygt 4660pump FOL-45 lower parts for flygt 2201... | |
Seal Spare Parts Sleeve | In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal... | |
Stainless Steel Seal | Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as ai... | |
Pump Spare Parts | Pump body:including suction chamber and the pressure chamber,water pump spare partsSuction chamber:its function is to allow the liquid to flow even... |