FHR Diode Laser Hair Removal System
Product DescriptionAM808-P, clinically proven to deliver safe and effective hair removal on all skin and hair types, is the fastest diode laser platform.It is performed using gold standard 808nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.Specification:Wavelength808nmFluency1-120J/cm2Laser TypeGerman DiodeSpot Size12*12mm2Repetition Rate1-10HzPulse Width2.88-345msPeak Power1500WCoolingPowerful Sapphire contact cooling (-10℃~0℃ )Stand-by WorkingContinuously for 18 hoursDisplay10.4" True Color LCD Touch ScreenElectrical Requirements240VAC110VAC, 20A max., 50/60HzNet Weight55 kgsDimensions (WxDxH)400mm*330mm*1200mmApplicationPermanent no pain hair removal for any area of the body, such as: beard,Lip hair, armpit hair, chest hair, back hair, arm hair, leg hair, unwanted hair and so on ;Pain-Free, Hair-Free - Comfortable Hair RemovalEffective treatment of Pigmentation, freckles,Skin elasticity improvement.Theory:808nm wavelength Diode laser penetrates into the dermis,and is absorbed by the targeted melanin in the hair follicles. This will form enough thermal energy to destroy the targeted follicular epithelium because of the laser-induced photothermal effect.In contrast, the surrounding skin tissue is spared due to lack of melanin. This way, the surrounding skin remains intact, while the hair follicles are selectively affected, which leads to non-invasive permanent hair reduction.Advantage:1、Add hardware system of water quality detection Cooling-Water quality is one of key important for diode laser machine,especially in micro-channel diode laser system. But most machines now in the market have no any detection of cooling-water inside. There has no substantive judgment by any detection.So how to make sure that 1)the cooling-water is really always no problem after using for a while; 2) the filters inside are really always changed timely in the reasonable time; 3) the cooling-water replacement or supplement by users is really always no problem?Water quality detection added could confirm the cooling-water inside is really no any problem, no any harmful to the micro-channel diode modules inside. The risk of micro-channel blocking is reduced in maximum.(just give after clients shows interests in above questions) 2、Filters inside replacementThere’s no way if there have no any filters in diode laser system. Filters replacement should be done according to the operation manual.How could you make sure that filters is really changed timely according to the manual? And shall we send a engineer to there only just for filters replacement by car, by train, even by air?To install a intelligent filter suit in diode laser system is adopted by us. And change the structure design to enhance filters could be replaced easily by End-users. Then the issue of timely filters replacement could be confirmed by both sides. Factory or distributors does not need to make a date for filters replacement. The machine will give a signal automatically.Easy work & Easy service. Then potential risk caused by filters are reduced a lot.(just give after clients shows interests in above questions) 3、Optimization of cooling-water pressure and flowGive a high water flow at 3L/min (which is more 0.5L/min than normally diode machine) but with a reasonable water pressure. And also make water pressure protection on the real point of inlet of diode laser modules. Above two optimization enhance the heat dissipation of diode laser modules, more steady-works, and more longer life-span.(just give after clients shows interests in above questions) 4、Rational uses of lasers1）Set light pulse strictly according to the diode laser standardsStrictly abiding by micro-channel laser duty radio index, set a reasonable energy output and keep the duty radio under 40% which is most manufacturer ignored of, to reduce the resulting thermal damage.80j/cm2at 1Hz, 28j/cm2at 6Hz, 16j/cm2at 10Hz is reasonable for hair removal. Prohibit high duty ratio to reduce the resulting thermal damage.Energy output diagnose as below:Spot Size：12×12mm2Frequency1Hz2Hz3Hz4Hz5Hz6Hz7Hz8Hz9Hz10HzEnergy Density max.
(j/cm）360o protection of the diode laser modulesIn order to avoid the damage caused by electrical noise for lasers,like over-voltage & over-current, an extra hardware protection is installed at the closest point to laser modules.(just after clients shows fear of laser modules burning problem, or comparing with others system) 5、Under 33℃ cooling-water confirmed even 24 hours continues workSuper heat radiator adopted have more 1.5 times radiation capacity than most other system. Even the ambient temperature is 28℃, the cooling temperature just increase 5℃. Temperature increase less, then thermal damage less cause, and life spam extend more.6、Optimization of control system1）Extra real-time detection installed of output of laser power supply;2）Real-time detection info showed on the screen is directly seen even by operators;3）Auto detection, and self judgment of damaged parts;4）Extra voltage & current detection of laser input installed; keep the original voltage & current detection of laser power supplier;Double checking system enhance the laser output stability and safety. 7、Life-span of handpiecePromise of 10M shots warranty (in one year).
Other supplier products
|
|
Portable Bipolar RF Slimming Beauty Device |
RF eye care system for puffinessProduct DescriptionOur eye care system utilizes electromagnetism frequency principle and precision temperature cont... |
|
|
Body Cellulite Removal Machine |
AM-v12Application of Cryolipolysis slimming machine 1 Cellulite reduction 2 Slimming and dissolve fat 3, Tightening skin ,skin anti aging 4,Improve... |
|
|
RF Body Shaping Machine |
Applications:1.SMAS RF Skin tightening2.Face lifting & shaping3.Wrinkle removal4.Double chin removal5.Improve facial relaxation6.Increase skin elas... |
|
|
OPT FHR IPL System |
working principleLight-heat effect: Heat energy from intense pulsed light will be transmited through hair body to its bottom. The fast rising high ... |
|
|
Multifuction IPL Machine |
Application Fast hair removal Fast skin Rejuvenation Pigmentation removal Vascular removal Working principle Light-heat effect: Heat energy from in... |
All supplier products
Same products
|
|
Big Storage Cart Salon Trolley |
Seller: BeautyCool Hairdressing Co. ,Ltd |
Big Storage Cart Salon Trolley,Salon Trolley |
|
|
With Door Salon Trolley |
Seller: BeautyCool Hairdressing Co. ,Ltd |
With Door Salon Trolley,Salon Trolley |
|
|
With Lockable 2 Key Salon Trolley |
Seller: BeautyCool Hairdressing Co. ,Ltd |
With Lockable 2 Key Salon Trolley,Salon Trolley |
|
|
Salon Trolley With Drawer |
Seller: BeautyCool Hairdressing Co. ,Ltd |
Salon Trolley With Drawer,Salon Trolley |
|
|
Salon Trolley With Wheels |
Seller: BeautyCool Hairdressing Co. ,Ltd |
Salon Trolley With Wheels,Salon Trolley |
