Cable Guy Grip Dead End
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for these dead-ends are superior to that of homogeneous cables.
But, for steel-core cables the strength is approx the same as the breaking load of the aluminum strands.
This products are manufactured with aluminum covered steel for ACSR and homogeneous conductor, with copper covered steel for copper conductors and galvanized steel for direct application on insulator conductor.
These transmission and distribution dead-ends must be used with a clevis thimble and insulators which have smoothly contoured surfaces adequate groove widths and loop diameters.
ORDERING INFORMATION
When ordering, please specify:
-conductor type, stranding, breaking strength, out layer direction
NOTE:
The out layer direction of transmission and distribution dead-ends must be same as that of the outer standing of the conductor to which it is applied.
Transmission&Ddistribution dead-ends
-For insulated and covered cables
MATERIAL
Dead-ends:
High-tensile galvanized steel.
APPLICATION
Suited for the full tensioning of insulated conductors on transmission and distributribution lines.
SELECTION CHART
| Model |
JKLYJ GB 14049-1993 |
Clamplength(mm) |
Clampweight(kg) |
Fittings |
| Sectional area(mm²) |
Outside diameter(mm) |
| NL-35/JY |
35 |
14.80 |
900 |
0.8 |
QH-7 |
| NL-50/JY |
50 |
16.10 |
980 |
1.1 |
| NL-70/JY |
70 |
17.80 |
| NL-95/JY |
95 |
19.60 |
1020 |
1.5 |
| NL-120/JY |
120 |
21.00 |
| NL-150/JY |
150 |
22.60 |
1020 |
1.8 |
| NL-185/JY |
185 |
24.20 |
1020 |
2.2 |
| NL-240/JY |
240 |
26.40 |
| NL-300/JY |
300 |
28.60 |
1020 |
3.0 |
| Note：The meaning of the letters and numbersin the model no.：N-strain clamp；L-spiralpreformed；after“-”is the suitable wiretype；JY- insulationwire |
Другие товары поставщика
|
|
Metal Dome Type Splice Closure for Opgw Cable |
Cable Margin Supporters for ADSS (AYLJ)The cable margin supporter is used for extra cables when emplacing cable connective ends, Usually, one cab... |
|
|
Overhead Line Fittings for Electric Power |
MaterialDead-ends:High-tensile galvanized steel.ApplicationSuited for the full tensioning of groundwire or staywire on transmission and distributr... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
FUNCTIONIt fixes the down-leading or up-leading cable from the poles/towers to the poles/towers, preventing shaking, and avoiding attrition.CONDIT... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, e... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
PROTECTIONArmor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or... |
Все товары поставщика
Похожие товары
