Metal Dome Type Splice Closure for Opgw Cable
PROTECTION
Armor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or with angles. They protect conductors for line angles up to 30°. Armor Rods fit tightly with the suspension and prevent bending of the conductors.
Damage of overhead conductors depends upon line design, exposure to wind flow, tension and vibration which create mechanical strains through each strand.
Attachment and suspension points of heavy fittings are the first to be damaged because of mechanical strains concentration. The application of an armor rod should decrease the strains and slightly extend the life of the conductor, particularly where the conductor endures severe conditions.
MATERIAL
These products are made from aluminium alloy.
NOTE
Lay direction of the armor rod must be the same as that of the outer stranding of the conductor to which it is applied.
ORDERING INFORMATION
When ordering,please specify:
-conductor type, stranding, outside diameter and lay direction
For AAC/AAAC/ACSR/ACAR
SELECTION CHART
| Model | Suitable wire (GB/T 1179-1983) | Clamp length(mm) | Diameter(mm) | Clamp weight(kg) | |
| Model | Outside Diameter(mm) | ||||
| HL-95/15 | LGJ-95/15 | 13.61 | 1400 | 3.5 | 0.7 |
| HL-95/20 | LGJ-95/20 | 13.87 | 1400 | 3.5 | 0.7 |
| HL-95/55 | LGJ-95/55 | 16.00 | 1500 | 3.5 | 1.0 |
| HL-120/7 | LGJ-120/7 | 14.50 | 1400 | 3.5 | 0.7 |
| HL-120/20 | LGJ-120/20 | 15.07 | 1400 | 3.5 | 0.7 |
| HL-120/25 | LGJ-120/25 | 15.74 | 1400 | 3.5 | 0.7 |
| HL-120/70 | LGJ-120/70 | 18.00 | 1800 | 4.5 | 1.3 |
| HL-150/8 | LGJ-150/8 | 16.00 | 1500 | 3.5 | 1.0 |
| HL-150/20 | LGJ-150/20 | 16.67 | 1.0 | ||
| HL-150/25 | LGJ-150/25 | 17.10 | 1.0 | ||
| HL-150/35 | LGJ-150/35 | 17.50 | 1.2 | ||
| HL-185/10 | LGJ-185/10 | 18.00 | 1800 | 5.0 | 1.3 1.4 1.4 1.4 |
| HL-185/25 | LGJ-185/25 | 18.90 | |||
| HL-185/30 | LGJ-185/30 | 18.88 | |||
| HL-185/45 | LGJ-185/45 | 19.60 | |||
| HL-210/10 | LGJ-210/10 | 19.00 | 1800 | 5.0 | 1.5 2.0 2.0 2.0 |
| HL-210/25 | LGJ-210/25 | 19.98 | |||
| HL-210/35 | LGJ-210/35 | 20.38 | |||
| HL-210/50 | LGJ-210/50 | 20.86 | |||
| HL-240/30 | LGJ-240/30 | 21.60 | 1900 | 5.0 | 2.2 |
| HL-240/40 | LGJ-240/40 | 21.66 | |||
| HL-240/55 | LGJ-240/55 | 22.40 | |||
| HL-300/15 | LGJ-300/15 | 23.01 | 2000 | 6.0 | 2.2 2.5 2.7 2.7 2.7 2.7 |
| HL-300/20 | LGJ-300/20 | 23.43 | |||
| HL-300/25 | LGJ-300/25 | 23.76 | |||
| HL-300/40 | LGJ-300/40 | 23.94 | |||
| HL-300/50 | LGJ-300/50 | 24.26 | |||
| HL-300/70 | LGJ-300/70 | 25.20 | |||
| HL-400/20 | LGJ-400/20 | 26.91 | 2200 | 6.0 | 4.2 4.2 4.2 4.2 4.7 4.8 |
| HL-400/25 | LGJ-400/25 | 26.64 | |||
| HL-400/35 | LGJ-400/35 | 26.82 | |||
| HL-400/50 | LGJ-400/50 | 27.63 | |||
| HL-400/65 | LGJ-400/65 | 28.00 | |||
| HL-400/95 | LGJ-400/95 | 29.14 | |||
| HL-500/35 | LGJ-500/35 | 30.00 | 2500 | 6.0 | 5.2 |
| HL-500/45 | LGJ-500/45 | 30.00 | |||
| HL-500/65 | LGJ-500/65 | 30.96 | |||
| HL-630/45 | LGJ-630/45 | 33.60 | 2500 | 7.9 | 6.8 |
| HL-630/55 | LGJ-630/55 | 34.32 | |||
| HL-630/80 | LGJ-630/80 | 34.82 | |||
| HL-800/55 | LGJ-800/55 | 38.40 | 2500 | 7.9 | 6.8 |
| HL-800/70 | LGJ-800/70 | 38.58 | |||
| HL-800/100 | LGJ-800/100 | 38.98 | |||
| Note:The meaning of the letters and numbers in the model no.:H-Armor Rod;L-spiral preformed;after“-”is the suitablewire type. | |||||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Metal Dome Type Splice Closure for Opgw Cable | COMPONENTinner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, e... | |
| Metal Dome Type Splice Closure for Opgw Cable | CONDITIONS FOR THE USAGEExcess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter l... | |
| Metal Dome Type Splice Closure for Opgw Cable | PROTECTIONArmor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or... | |
| Metal Dome Type Splice Closure for Opgw Cable | FUNCTIONIt eliminates or reduces the vibrations that come from the effect of laminar flow wind, and prevents damage of the hardware fittings and t... | |
| Overhead Line Fittings for Electric Power | Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
Похожие товары
| Control valve for fuel Injector 0445120359 | Продавец: 828487 | Control valve for fuel Injector 0445120359 Control valve for fuel Injector 0445120683 China-Lu... | |
| Control valve for fuel Injector 0445120315 Control valve for fuel Injector 0445120327 | Продавец: 828487 | Control valve for fuel Injector 0445120315 Control valve for fuel Injector 0445120327 China-L... | |
| Control valve for fuel Injector 0445120296 Control valve for fuel Injector 0445120297 | Продавец: 828487 | Control valve for fuel Injector 0445120296 Control valve for fuel Injector 0445120297 China-Luto... | |
| China import canton fair october 15 to 19 2026 | Продавец: 828487 | China import canton fair october 15 to 19 2026 China-Lutong is now one of the specialist Fuel ... | |
| The 2026 CIMP AutoEcosystems Expo | Продавец: 828487 | The 2026 CIMP AutoEcosystems Expo China-Lutong is now one of the specialist Fuel Injection Sys... |












