WATER METER SHAFT
The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".
The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.
Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.
Xiamen Betalent Carbide Co., Ltd isa professional carbide products inc, we provide cemented carbide tools, carbide product, etc.Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... |
 |
TAPER END MILL | The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end m... |
 |
WIRE DRAWING DIE BLANK | According to the working properties, the structure of drawing die core can be divided into five sections: "entrance area, lubrication area, working... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer end mill: A suitable negative front angle design is adopted, which takes into account the edge stren... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer mill: A suitable negative front angle design is adopted, which takes into account the edge strength and... |
Похожие товары
 |
Microcrystalline wax used for rubber plastic processing and modification | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Продавец: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Продавец: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Продавец: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | Продавец: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
