WATER METER SHAFT

• 

The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".

The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.

Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.

Xiamen Betalent Carbide Co., Ltd isa professional carbide products inc, we provide cemented carbide tools, carbide product, etc.Want to know more? Please contact us.

Other supplier products

	CHAMFERING END MILL	The advantages of Betalent carbide chamfer mill: A suitable negative front angle design is adopted, which takes into account the edge strength and...
	CARBIDE ROLLER	Due to the high thermal conductivity of the cemented carbide, carbide rollerhas good heat dissipation, which shortens the time of the roll surface ...
	TAPER END MILL	The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end m...
	COLD HEADING DIE CORE NUT DIE	The cold headingdie bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required ...
	2 FLUTE, 0.6 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER	2 FLUTE, 0.6 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutting dia. Grade BT55 Shank dia....

Same products

	Co2 Fractional Laser divides	Seller: Beijing Mega Beauty Technology Co.,Ltd	Co2 Fractional Laser divides the laser beam into multiple, smaller beams spaced regularly to...
	Fractional CO2 Laser Skin Resurface	Seller: Beijing Mega Beauty Technology Co.,Ltd	Fractional CO2 Laser Skin Resurface Fractional CO2 Laser Skin Resurface Model: MBT-Co2 is ...
	Medical Aesthetic Devices	Seller: Beijing Mega Beauty Technology Co.,Ltd	Medical Aesthetic Devices Medical Aesthetic Devices is a leading Medical Aesthetic Device...
	HIFU SMAS Lifting	Seller: Beijing Mega Beauty Technology Co.,Ltd	HIFU SMAS Lifting , the newest non-surgical method of skin lifting for the face and body. On...
	Body Slimming Machine	Seller: Beijing Mega Beauty Technology Co.,Ltd	Body Slimming Machine MBT-Laser Body Slimming Machine Use cutting-edge technology to sl...