WATER METER SHAFT
The shell is made of cast iron. After water comes out from the water inlet, it passes through the lower annular space of the shell, which is called "lower ring chamber". On the top of the annular space, there is a "upper ring chamber" connected with the water outlet. The bottom of the sleeve has a filter screen with small holes to filter out the impurities in the water. There are two rows of round holes on the side of the sleeve. The position of the holes is just opposite to the upper and lower ring chambers of the shell. The inner core is divided into upper, middle and lower layers. The upper layer can be seen from the glass window, with only the pointer and dial. There is a plastic wheel in the lower layer. There are many plastic blades on the edge of the wheel, which is called "impeller".
The position of the impeller is just in the rotary flow formed by the hole in the lower layer of the casing pipe. The water flow impacts the blade around the wheel, and generates torque to make the impeller rotate. The bigger the faucet is, the faster the flow is, and the faster the impeller will turn.
Thus, the water meter shaftneeds to be corrosion-resistant, non rusting, water pressure resistant, relatively high hardness and no deformation. Tungsten steel water meter shaft has these advantages and perfectly replaced the steel shaft.
Xiamen Betalent Carbide Co., Ltd isa professional carbide products inc, we provide cemented carbide tools, carbide product, etc.Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
SOLID CARBIDE ROD | Solid carbide rodis the most general shape of tungsten carbide blank material for cutting tools. And for cutting tools application, tungsten carbi... |
 |
TURNING INSERT | Betalent carbide offers standard carbide turning insertsin different shapes, different application. To select a proper turning insert, you need to ... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer mill: A suitable negative front angle design is adopted, which takes into account the edge strength and... |
 |
ROUGHING END MILL | ROUGHING END MILL There are four carbide grades applied to general flat end mills: BT45, for milling materials of which hardness range from HRC4... |
 |
CHAMFERING END MILL | The advantages of Betalent carbide chamfer end mill: A suitable negative front angle design is adopted, which takes into account the edge stren... |
Same products
 |
Microcrystalline wax used for rubber plastic processing and modification | 卖方: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | 卖方: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | 卖方: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | 卖方: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | 卖方: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
