100G QSFP28 AOC

T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP(MPO) connector.

Features of China100G QSFP28 AOC

Four-channel full-duplex active optical cable with QSFP28 plugs

Produced by T&S, a professional AOC manufacturer, the 100G QSFP series has multi-rate capability: 10Gb/s and 25Gb/s per channel

Reliable VCSEL array technology using MMF

Hot Pluggable

Power dissipation:<3.5W

Operating case temperature 0℃ to 70℃

RoHS compliant

Applications of 100G QSFP28 AOC

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4 28G Fiber Channel

Infiniband FDR/EDR

Specifications of 100G QSFP28 AOC

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	TS	-20	85	℃
Case Operating Temperature	TCase	0	70	℃
Relative Humidity	RH	0	85	%
Supply Voltage	VCC	-0.5		V

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Case Operating Temperature	TCase	0	-	70	℃
Humidity	RH	5	-	85	-
Supply Voltage	VCC				V
Data Rate Per Lane	DR	-		-	Gbit/s
Fiber Bend Radius	Rb	3	-	-	cm

Electrical Characteristics

NOTE: The EDR module requires an electrical connector compliant with SFF-8662 or SFF-8672 be used on the host board to guarantee its electrical interface specification. Please check with your connector supplier

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC		-		V
Supply Current	ICC	-	-	1010	mA
Total Power Dissipation1,2	P	-	-		W
Transmitter
Differential Input Voltage	Vin	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf	10	-		ps
Receiver
Differential Output Voltage	Vout	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf		-	-	ps
Bit Error Rate3	BER	-	-	10-12	-

Note:

Maximum total power value is specified across the full temperature and voltage range

Settable in various discrete steps via the I2C interface

BER=10-12, PRBS

TS Communicationis a professional optical fiber manufacturer, we provide optical communications products, 100g aoc cableand etc. Want to know 100g aocor more? Please contact us.

Другие товары поставщика

	MTP®/MPO LOOPBACK Adapter	T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-desig...
	SC/SM/PC	ID 0.125/0.126mm, concentricity 1.0um, OD 2.4990mm, this kind of standard optical ferrules with good thermal stability, high precision and reliabil...
	AOC / DAC / TRANSCEIVER	Along with passive optical components, active optical components are indispensable elements of an optical network. T&S Communications adopts un...
	AOC (ACTIVE OPTICAL CABLE)	AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC ...
	FIBER OPTICAL COMPONENTS	As the Chinese mainland's first fiber optic component manufacturers, T&S has 20 years of production history and has the ability to produce from...

Все товары поставщика

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...