100G QSFP28 AOC

T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP(MPO) connector.

Features of China100G QSFP28 AOC

Four-channel full-duplex active optical cable with QSFP28 plugs

Produced by T&S, a professional AOC manufacturer, the 100G QSFP series has multi-rate capability: 10Gb/s and 25Gb/s per channel

Reliable VCSEL array technology using MMF

Hot Pluggable

Power dissipation:<3.5W

Operating case temperature 0℃ to 70℃

RoHS compliant

Applications of 100G QSFP28 AOC

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4 28G Fiber Channel

Infiniband FDR/EDR

Specifications of 100G QSFP28 AOC

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	TS	-20	85	℃
Case Operating Temperature	TCase	0	70	℃
Relative Humidity	RH	0	85	%
Supply Voltage	VCC	-0.5		V

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Case Operating Temperature	TCase	0	-	70	℃
Humidity	RH	5	-	85	-
Supply Voltage	VCC				V
Data Rate Per Lane	DR	-		-	Gbit/s
Fiber Bend Radius	Rb	3	-	-	cm

Electrical Characteristics

NOTE: The EDR module requires an electrical connector compliant with SFF-8662 or SFF-8672 be used on the host board to guarantee its electrical interface specification. Please check with your connector supplier

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC		-		V
Supply Current	ICC	-	-	1010	mA
Total Power Dissipation1,2	P	-	-		W
Transmitter
Differential Input Voltage	Vin	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf	10	-		ps
Receiver
Differential Output Voltage	Vout	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf		-	-	ps
Bit Error Rate3	BER	-	-	10-12	-

Note:

Maximum total power value is specified across the full temperature and voltage range

Settable in various discrete steps via the I2C interface

BER=10-12, PRBS

TS Communicationis a professional optical fiber manufacturer, we provide optical communications products, 100g aoc cableand etc. Want to know 100g aocor more? Please contact us.

Other supplier products

	PLC CHIP	As one of the professional PLC splitter manufacturers, T&S provides a wide range of different fiber optic components at reasonable prices. Base...
	PLC WAFER & CHIP	As an experienced plc splitter factory, T&S offers PLC splitter wafers as well. Based on Planar Lightwave Circuit technologies, PLC splitter wa...
	PLC SPLITTER	PLC SPLITTER As a professional plc splitter manufacturer, T & S Communication produces a planar optical waveguide chip on its own and manufactu...
	100G QSFP28 AOC	T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/E...
	AOC (ACTIVE OPTICAL CABLE)	AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC ...

供应产品

Same products

	FT wax used for EVA-based hot melt adhesive	卖方: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	卖方: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	卖方: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	卖方: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	卖方: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...