High-Density Compounds
High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc.
Properties of Soft Magnetic Bonded Compounds
Less production process and suitable for automatic production
The product is energy-efficient and harmless to the environment
Applications of Soft Magnetic Bonded Compounds
Counterweight material (counterweight of automobile, imitation gun, golf equipment, etc.); Medical industry.
Specification of High Gravity Compoundsand Metal Bonded Plastic
|
Grade |
HAA |
HCA |
HWA |
||
|
Resin Binder |
PA6 |
||||
|
Mechanical Properties |
Tensile Strength |
MPa |
55 |
60 |
66 |
|
Flexural Strength |
MPa |
100 |
105 |
112 |
|
|
Physical Properties |
Mold Density |
g/cm3 |
2 |
10 |
|
|
Melt Flow Rate |
g/10min |
132 |
145 |
155 |
|
|
HDT |
℃ |
150 |
150 |
150 |
|
|
Thermal conductivity |
W/(m·K) |
||||
|
Mold Shrinkage Rate |
% |
||||
|
Injection Parameters |
Pre-drying Temp |
℃ |
80-110 |
80-110 |
80-110 |
|
Pre-drying Time |
hr |
||||
|
Barrel Temp |
H1 ℃ |
260-270 |
260-270 |
260-270 |
|
|
H2 ℃ |
270-280 |
270-280 |
270-280 |
||
|
H3 ℃ |
275-285 |
275-285 |
275-285 |
||
|
Mold Temp |
℃ |
80-90 |
80-90 |
80-90 |
|
|
Pressure |
bar |
65-80 |
65-80 |
65-80 |
|
|
Speed |
V% |
60-80 |
60-80 |
60-80 |
|
If you want to know more about magnet material composition, please visit our website.
Now the price of injection magnetis affordable, if you have needs, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Quality Magnetic Products & Solutions | Magnets and magnets assemblies have to meet increasingly complex requirements. Advantage of Bonded Magnetic Compounds As a new type of magnetic ma... |
 |
Hard-Ferrite Bonded Magnetic Compounds | Light density and low cost of ferromagnetic compounds (hard ferrite magnets) create a high-cost performance. Therefore, it has the largest market d... |
 |
Hard Magnetic Bonded Compounds | Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth magnet... |
 |
Bonded Neodymium Magnetic Compounds | Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for su... |
 |
High-Density Compounds | High Gravity Compounds High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher tha... |
Похожие товары
 |
FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 | Продавец: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Продавец: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
