High-Density Compounds
High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc.
Properties of Soft Magnetic Bonded Compounds
Less production process and suitable for automatic production
The product is energy-efficient and harmless to the environment
Applications of Soft Magnetic Bonded Compounds
Counterweight material (counterweight of automobile, imitation gun, golf equipment, etc.); Medical industry.
Specification of High Gravity Compoundsand Metal Bonded Plastic
|
Grade |
HAA |
HCA |
HWA |
||
|
Resin Binder |
PA6 |
||||
|
Mechanical Properties |
Tensile Strength |
MPa |
55 |
60 |
66 |
|
Flexural Strength |
MPa |
100 |
105 |
112 |
|
|
Physical Properties |
Mold Density |
g/cm3 |
2 |
10 |
|
|
Melt Flow Rate |
g/10min |
132 |
145 |
155 |
|
|
HDT |
℃ |
150 |
150 |
150 |
|
|
Thermal conductivity |
W/(m·K) |
||||
|
Mold Shrinkage Rate |
% |
||||
|
Injection Parameters |
Pre-drying Temp |
℃ |
80-110 |
80-110 |
80-110 |
|
Pre-drying Time |
hr |
||||
|
Barrel Temp |
H1 ℃ |
260-270 |
260-270 |
260-270 |
|
|
H2 ℃ |
270-280 |
270-280 |
270-280 |
||
|
H3 ℃ |
275-285 |
275-285 |
275-285 |
||
|
Mold Temp |
℃ |
80-90 |
80-90 |
80-90 |
|
|
Pressure |
bar |
65-80 |
65-80 |
65-80 |
|
|
Speed |
V% |
60-80 |
60-80 |
60-80 |
|
If you want to know more about magnet material composition, please visit our website.
Now the price of injection magnetis affordable, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Advantage of Bonded Magnetic Compounds | There are many kinds of magnetic materials, including soft magnetic materials and hard magnetic materials.As a new type of magnetic material, bonde... |
 |
Magnetic Solution For Famous Customers | We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter... |
 |
High-Density Compounds | High Gravity Compounds High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher tha... |
 |
Hard-Ferrite Bonded Magnetic Compounds | Compared to rare earth magnetic materials, bonded ferrite magnets have obvious cost advantage due to the use of cheap strontium oxide, barium oxide... |
 |
Magnetic Solution For Famous Customers | We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | 卖方: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | 卖方: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | 卖方: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
