High-Density Compounds
High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc.
Properties of Soft Magnetic Bonded Compounds
Less production process and suitable for automatic production
The product is energy-efficient and harmless to the environment
Applications of Soft Magnetic Bonded Compounds
Counterweight material (counterweight of automobile, imitation gun, golf equipment, etc.); Medical industry.
Specification of High Gravity Compoundsand Metal Bonded Plastic
|
Grade |
HAA |
HCA |
HWA |
||
|
Resin Binder |
PA6 |
||||
|
Mechanical Properties |
Tensile Strength |
MPa |
55 |
60 |
66 |
|
Flexural Strength |
MPa |
100 |
105 |
112 |
|
|
Physical Properties |
Mold Density |
g/cm3 |
2 |
10 |
|
|
Melt Flow Rate |
g/10min |
132 |
145 |
155 |
|
|
HDT |
℃ |
150 |
150 |
150 |
|
|
Thermal conductivity |
W/(m·K) |
||||
|
Mold Shrinkage Rate |
% |
||||
|
Injection Parameters |
Pre-drying Temp |
℃ |
80-110 |
80-110 |
80-110 |
|
Pre-drying Time |
hr |
||||
|
Barrel Temp |
H1 ℃ |
260-270 |
260-270 |
260-270 |
|
|
H2 ℃ |
270-280 |
270-280 |
270-280 |
||
|
H3 ℃ |
275-285 |
275-285 |
275-285 |
||
|
Mold Temp |
℃ |
80-90 |
80-90 |
80-90 |
|
|
Pressure |
bar |
65-80 |
65-80 |
65-80 |
|
|
Speed |
V% |
60-80 |
60-80 |
60-80 |
|
If you want to know more about magnet material composition, please visit our website.
Now the price of injection magnetis affordable, if you have needs, please contact us.
Send product request
Other supplier products
 |
Other Functional Maglastic Materials You May Like | High density and metal bonded plastic functional composite materialswith complex and delicate structures can also be prepared by the injection mold... |
 |
Bonded Neodymium Magnetic Compounds | Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets(bonded NdFeB magnet) has high mechanical performance and no need for su... |
 |
Magnetic Materials in Permanent Magnet Motors | Permanent magnet motors use permanent magnets to generate the magnetic field of the motor. It does not require an excitation coil or excitation cur... |
|
|
High-Density Compounds | High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary meta... |
 |
Quality Magnetic Products & Solutions | Advantage of Bonded Magnetic Compounds As a new type of magnetic material, bonded magnetic compounds have been widely used in the field of motors,... |
Same products
 |
FT wax used for EVA-based hot melt adhesive | Seller: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Seller: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Seller: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
 |
Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19A | Seller: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... |
 |
High melting point FT wax used as plastic processing additives | Seller: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |
