Knife Gate Valve

• 

Features of sewer knife gate valve

Full bore design for high media throughput capacity;

U-shaped gasket with good sealing effect;

Gate plate with gate function, good shut-off effect, can effectively shut off all kinds of debris in the media, to solve the leakage phenomenon after shut-off containing lumps, particles and fiber media;

Able to work in dirty media, easy to install, easy to disassemble, easy to maintain, without removing the valve can replace the valve seals, making valve maintenance more simple.

Knife Gate Valve Working Principle

The wiper between the valve body and bonnet of the knife gate valve prevents solid particles from entering the bonnet. The valve body cavity, seat configuration and slant gate design provide features to impede the entry of thick media (e.g. pulp, slurry) or solid media (e.g. granules and powders). 　　

Knife gate valve gate and seat are always in close contact with the sealed valve, the gate with a guide hole with the same through conduit gate valve, the gate has a through diameter size of the round hole, through the gate opening and closing so that the round hole on the gate and the through diameter to do a complete disengagement and coincide with the action. In addition, the advantage of the structure is that the valve body diameter without grooves, the medium will not be blocked, and has a full diameter flow characteristics, suitable for the use of powder and particle media in the pipeline. Its sealing structure can be divided into soft seal, hard seal structure. Sealed valve seat is designed with movable structure, with anti-wear and automatic compensation function, thus longer life. In the process of closing and opening the check valveseat and the gate plate have been close to the movement, so that the valve opening and closing force is stable.

Knife Gate Valve Installation Orientation and Commissioning

Knife gate valve can be divided into pneumatic knife gate valve, electric knife gate valve, manual knife gate valve. According to the operation mode, Installation and operation according to the different operating instructions. For specific use, please consult Zeco Valve Group.

Knife Gate Valve Material and Standard
Size Range: 2"~48"
Pressure Rating: 10bar ~ 20bar

Face to Face Dimensions: MSS SP-81-2006

Flange End Dimension: EN1092, ASME B16.5, ASME B16.47, AS2129

Inspection and Test: MSS SP-81-2006
Knife Edge Gate Valve Specification

Part Material Standard
Body GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Bonnet GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Trim GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Seat HARD SEAL/EPDM ASTM STANDARD
For materials options not listed, consult factory.
Zeco manufactures valves in more than 50 different alloys.

As pneumatic knife gate valve suppliers / knife gate valve factory, we have types of related products for sale, if you have needs, please contact us.

If you want to know more about knife gate valve dimensions pdf / knife edge gate valve pdf, please visit our website.

As a china valve supplier, we have types of related products for sale, if you have needs, please leave us a message.

Другие товары поставщика

	3 Inch Gate Valve	Description of 3 Inch Gate Valve: ZECO 3 inch gate valve is mainly used for fully open or fully closed switching valves. They are usually not used ...
	Top Entry Ball Valve	Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf...
	Foot Valve	Basic information of Foot ValveThis valve is installed at the bottom of the pump's underwater pipette, restricting the return of the liquid to the ...
	Double Orifice Air Release Valve	Basic informationThis is a pipeline will be matched equipment, apply to the temperature does not exceed 100 water, hot water pipe on the pipe from ...
	Flapper Check Valve	Basic informationThis can be installed at the water outlet of the pump or the water outlet pipe to prevent backflow of the medium.Features1. Switch...

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...