Knife Gate Valve
Features of sewer knife gate valve
Full bore design for high media throughput capacity;
U-shaped gasket with good sealing effect;
Gate plate with gate function, good shut-off effect, can effectively shut off all kinds of debris in the media, to solve the leakage phenomenon after shut-off containing lumps, particles and fiber media;
Able to work in dirty media, easy to install, easy to disassemble, easy to maintain, without removing the valve can replace the valve seals, making valve maintenance more simple.
Knife Gate Valve Working Principle
The wiper between the valve body and bonnet of the knife gate valve prevents solid particles from entering the bonnet. The valve body cavity, seat configuration and slant gate design provide features to impede the entry of thick media (e.g. pulp, slurry) or solid media (e.g. granules and powders).
Knife gate valve gate and seat are always in close contact with the sealed valve, the gate with a guide hole with the same through conduit gate valve, the gate has a through diameter size of the round hole, through the gate opening and closing so that the round hole on the gate and the through diameter to do a complete disengagement and coincide with the action. In addition, the advantage of the structure is that the valve body diameter without grooves, the medium will not be blocked, and has a full diameter flow characteristics, suitable for the use of powder and particle media in the pipeline. Its sealing structure can be divided into soft seal, hard seal structure. Sealed valve seat is designed with movable structure, with anti-wear and automatic compensation function, thus longer life. In the process of closing and opening the check valveseat and the gate plate have been close to the movement, so that the valve opening and closing force is stable.
Knife Gate Valve Installation Orientation and Commissioning
Knife gate valve can be divided into pneumatic knife gate valve, electric knife gate valve, manual knife gate valve. According to the operation mode, Installation and operation according to the different operating instructions. For specific use, please consult Zeco Valve Group.
Knife Gate Valve Material and Standard
Size Range: 2"~48"
Pressure Rating: 10bar ~ 20bar
Face to Face Dimensions: MSS SP-81-2006
Flange End Dimension: EN1092, ASME B16.5, ASME B16.47, AS2129
Inspection and Test: MSS SP-81-2006
Knife Edge Gate Valve Specification
Part Material Standard
Body GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Bonnet GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Trim GGG40/WCB/CF8/CF8M/4A ASTM STANDARD
Seat HARD SEAL/EPDM ASTM STANDARD
For materials options not listed, consult factory.
Zeco manufactures valves in more than 50 different alloys.
As pneumatic knife gate valve suppliers / knife gate valve factory, we have types of related products for sale, if you have needs, please contact us.
If you want to know more about knife gate valve dimensions pdf / knife edge gate valve pdf, please visit our website.
As a china valve supplier, we have types of related products for sale, if you have needs, please leave us a message.
Send product request
Other supplier products
 |
Strainer & Dirt Separator | Strainers, dirt separatorsand backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thre... |
 |
Top Entry Ball Valve | Description Due to the distinctive nature of the environmental conditions and operating conditions of the process, a typical ball valve is not suf... |
 |
Adjustable Dynamic Flow Balancing Valve | Basic information Adjustable dynamic flow balancingvalve can manually adjust the set flow rate in the pipeline, and also can automatically maintain... |
 |
Bronze Flow Balancing Valve | Basic information Venturi flowmeter is adopted in the body of a balanced valve with threaded connections to make flow adjustment more accurate and ... |
 |
Motorized Butterfly Valve | As one of the leadingchina ball valve suppliers, ZECO Valve Group developed our own laboratory for research &development for international stan... |
Same products
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Common Rail injector control valve F00VC01200 | Seller: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina #Stainless Steel Cylindrical Pin# #Denso Comm... |
 |
Injector Control Valve Plate 24# | Seller: China Lutong Part Plant | Injector Control Valve Plate 24# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
 |
Injector Control Valve Plate 12# | Seller: China Lutong Part Plant | Injector Control Valve Plate 12# Tina #Stainless Steel Cylindrical Pin# #Denso Common Rail Injec... |
