Edge Rolling Parts

• 

Edge rolling, we can also call it bending roll round, which is a method to put the sheet metal bending into the nearly closed cylinder forming. It belongs to a kind of metal cold bending.

Orienson's Edge Rolling Parts

Edge rolling produced in this way can achieve a thin wall, small weight, but big stiffness and complex shape. The product surface is bright and clean with a good appearance and precise size, and the length can be adjusted as needed. Orienson can produce a variety of products with uniform wall thickness and complex section shapes according to customers' needs. Welcome customers from all walks of life to contact us.

Edge Rolling Parts Design

For thin soft materials (t<=0.5)

A: When the inner diameter of the enclosed circle ∅d<=4.0, the 4-step pressure arc forming method is generally used for the enclosed circle, as shown in Figure 44-1.

B: When the inner diameter of the inner circle is 4. 0<∅d<=15.0, you can use either the 4-step arc forming style for wrapping or the mandrel forming style for wrapping

C: When the inner diameter of the inner circle ∅d>15.0, the mandrel forming method is generally used.

D: If the product requires a high centroid dimension, for the inner diameter of the inner circle ∅ D >3.0, we recommend using the mandrel forming method because it can make the circle a little rounder.

For thick hard materials (t>0.5)

For thick hard materials, if the 4-step pressure arc forming method is used to wrap the circle, it is generally difficult to wrap it around as the centrality is poor.

Because the material's yield strength is high, it is difficult to turn over to roll the material; And thin soft material's yield strength is low, the shape is easy to be rolled when making the formation, therefore, for thick hard material forming, we recommend to choose mandrel forming method to wrap. As shown in figure 44-2

What Is The Common Problems And Solutions In The Stamping Process Of Edge Rolling Parts

We often encounter poor roundness, too big a closure gap, and all kinds of technical problems such as surface pits when stamping edge rolling products. With more than 20 years of development, we already have a complete set of high precision equipment, a technical team, and a perfect scientific management system in the stamping industry, which can quickly help solve the problem of stamping precision and production quality for you. Choose Orienson, choose rest assured!

How Do You Roll Metal Edges?
Progressive die can adopt the forming method as shown in the figure below: the first step is 90° enveloping forming.

The Second Step 180° Enveloping Forming, The Third Step 240° Enveloping Forming, The Fourth Step Full Circle Forming.
As one of the most professoinal metal stamping parts suppliers , we provide sheet metal press parts, stamped sheet metal parts, metal stamping parts,

metal stamping, deep drawingand etc. Want to know metal stamping parts costor more, contact us.

Другие товары поставщика

	Electrical And Electronic Accessory Metal Stamping	Orienson has been trusted by the top international brands for our high-quality standard and innovative solutions, and have expanded to cover Low vo...
	Automotive Metal Stamping	Orienson has expanded into the automotive components market for years and produces the highest quality components for the world's top automotive br...
	Copper Stamping	Copper stampingis the processing of copper metal materials into custom-shaped hardware through stamping die. Orienson's Copper Stamping Copper is ...
	Aluminum Stamping	Aluminum alloy stamping refers to stamping hardware made of aluminum alloy. Orienson's Aluminum Stamping Aluminum alloy is the most widely used n...
	Bending Parts	The bending process is one of the common processing stamping methods, it refers to the forming method that a sheet and coil is bent into various sh...

Похожие товары

	Sodium tripolyphosphate（STPP） 7758-29-4	Продавец: Syntop chemical Co.,Ltd.	Sodium tripolyphosphate has a wide range of uses, because of its dispersion, chelating, gelling, ...
	L12301 12 Inch Brushless Chain Saw	Продавец: Zhejiang Huaqi Information Technology Co., LTD	额定电压：20V 电链锯线速度：7.6m/s 空载电流：6A 额定功率：1000W 锯片规格：12” 最大切割直径：250mm 刹车：有 ()
	Южная Африка – Цена на контейнеры для криогенных материалов – Лаборатория Дьюара KGSQ	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	Благодаря постоянному развитию науки и техники технология криогенного хранения все чаще используе...
	High quality Xylitol with competitive price	Продавец: Syntop chemical Co.,Ltd.	Industrial xylitol is a food additive, mainly used to improve taste, provide energy, laxative, im...
	Гайана – Криогенные контейнеры для хранения – Ячейка для хранения жидкого азота	Продавец: Henan Tianchi Instrument & Equipment Co., Ltd.	Благодаря постоянному развитию науки и техники технология криогенного хранения все чаще используе...