SFP 1.25G Tx1490/Rx1550 120Km LC Transceiver
Gearlink’s GCS9L0C45 SFP china transceiveris compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser), and the APD/TIA. The module data link up to 120km in 9/125um Single-mode fiber.
This transceiver meets the Small Form Pluggable (SFP) industry-standard package utilizing an integral LC-Bi-directional and bidi fiberoptical interface connector. An enhanced Digital Diagnostic Monitoring Interface compliant with SFF-8472 has been incorporated into the transceiver. It allows real-time access to the transceiver operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage by reading a built-in memory with an I²C interface.
The optical output can be disabled by an LVTTL logic high-level input of Tx Disable, and the system also can disable the module via I²C. Tx Fault is provided to indicate the degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of the receiver or the link status with the partner. The system can also get the LOS (or Link)/Disable/Fault information via I²C register access.
Get Free Quote
Technical Specification Of SFP 1.25G Tx1490/Rx1550 120Km LC Transceiver
General Specifications
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
|
Bit Rate |
BR |
Gb/sec |
|||
|
Max |
120 |
km |
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
||
|
Storage Temperature |
TS |
-40 |
85 |
ºC |
||
|
Storage Ambient Humidity |
HA |
5 |
95 |
% |
||
|
Power Supply Voltage |
VCC |
-0.5 |
4 |
V |
||
|
Signal Input Voltage |
-0.3 |
Vcc+0.3 |
V |
|||
|
Receiver Damage Threshold |
+3 |
dBm |
||||
|
Lead Soldering Temperature/Time |
Told |
260/10 |
ºC/sec |
Note 1 |
||
|
Lead Soldering Temperature/Time |
Told |
360/10 |
ºC/sec |
Note 2 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
SFP28 25G 1310nm 40km DDM LC Transceiver | GJS5L0C31 Lite is a 25Gb/s transceiver module designed for optical communication compliant to Ethernet 25 ER Lite standard. Its high-performance co... |
 |
QSFP 40G 1310nm 10km MPO Transceiver | 40G QSFP 1310nm 10km MPO is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total... |
 |
SFP 1.25G Tx1310/Rx1490 10Km LC Transceiver | Gearlink’s SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The 1310nm 1490nm sfp... |
 |
SFP 155M Tx1550/Rx1310 20Km LC Transceiver | The SFP-BIDItransceivers are high-performance, cost-effective modules supporting a dual data rate of 155Mbps and a 20km transmission distance with ... |
 |
SFP 155M 1310nm 20Km LC Transceiver | GearLink’s 100M SFP optical transceiver GAS4L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA). It w... |
Похожие товары
 |
Microcrystalline wax used for shoe polish processing | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax is commonly used in shoe polish, primarily to harden the formula, adju... |
 |
Microcrystalline wax used for rubber plastic processing and modification | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Продавец: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Продавец: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Продавец: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
