GOOT WICK Desoldering Wicks Original ESD Safe PCB Solder Wire

• 
• 

High-quantity 100% original GOOT desoldering wick with braided copper wire, saturated with non-chlorine special flux, can be used for precision PCB safely. CP-1015/1515/2015/2515/3015/3515 BGA desoldering wire solder wick except, sucking tin absorption wick wire for the tin absorbing excess solder, sucking tin belt BGA desoldering braid soldering line, trusted brand with world-beating productivity.

Goot CP-1515 BGA Desoldering Braid Soldering Line Sucking Tin Belt For Mobile Phone Motherboard Welding Repair Wire

100% original GOOT WICK desoldering wicks , made in Japan

[ Optional Desoldering Wick ] :

• Option 1: CP-1515 Width: Approx. 1.5mm, 1.5M Length
• Option 2: CP-2015 Width: Approx. 2.0mm, 1.5MLength
• Option 3: CP-2515 Width: Approx. 2.5mm, 1.5MLength
• Option 4: CP-3015 Width: Approx. 3.0mm, 1.5MLength
• Option 5: CP-3515 Width: Approx. 3.5mm, 1.5MLength

Warning :

1. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
2. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.

How to Use :

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove both the desoldering wick and the soldering iron tip from the PCB after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.

Caution :

1. To prevent injury, do not touch the wicks directly while desoldering. Hold the case, or use tweezers, ect.
2. Do not force the tip against the desoldering wick, do not heat for more than 5 seconds to avoid hurting yourself or damaging parts and PCB.

Package includes :

• 1pcs x GOOT WICK Desoldering Wick

Другие товары поставщика

	5.0MP M12/S-mount 3.5mm F2.8 Fixed Lens 1/2" CCTV Lens	M12/S-mount CCTV Surveillance Lens 5.0MP 3.5mm Low Distortion Fixed Machine Vision Lens 1/2" F2.8, fixed focus ITS camera, Industrial Cameras For V...
	TBK-508A 14 Inch Curved LCD Screen Vacuum Laminating Debubble Machine	TBK-508A Intelligent Curved Screen Laminating And Defoaming all-in-one Tablet Large-Size OCA Vacuum Laminating Machine With Moulds For Samsung iPho...
	5.0MP 6mm F2.8 Fixed 1/1.8" Aperture M12/S Mount CCTV Lens	M12/S-mount CCTV Surveillance Lens 5.0MP 6mm Low Distortion Fixed Machine Vision Lens 1/1.8" F2.8Aperture, Fixed Focus ITS Camera Lens For Robotiza...
	Mijing PM-11 LCD Holder Clip Flexible Screen Fastening Clamp	MiJing PM-11 flexible LCD holder for Mobile Phone Pads tablet repair. MJ PM-11 universal adjustable LCD Screen clamp fixture for display screen dis...
	CPB LCD Screen Heating Pad Opening Separator 380*220mm	Features : Safe and high efficiency -Two Smart Modes, mode settable temperature 50℉-248℉(10℃-120℃) tablet mode settable temperature 50℉-194℉(10℃...

Похожие товары

	Microcrystalline wax used for rubber plastic processing and modification	Продавец: Syntop chemical Co.,Ltd.	Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe...
	Microcrystalline wax 80A used for lubrication and demolding	Продавец: Syntop chemical Co.,Ltd.	The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot...
	Tyvek Flat Roll Pouch	Продавец: Hopeway AMD	Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli...
	Industrial Warehouse Ceiling Fans	Продавец: Hebei Windmax Power Technology Co., Ltd.	Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti...
	HVLS Ceiling Fan for Railway Station	Продавец: Hebei Windmax Power Technology Co., Ltd.	HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa...