GOOT WICK Desoldering Wicks Original ESD Safe PCB Solder Wire

• 
• 

High-quantity 100% original GOOT desoldering wick with braided copper wire, saturated with non-chlorine special flux, can be used for precision PCB safely. CP-1015/1515/2015/2515/3015/3515 BGA desoldering wire solder wick except, sucking tin absorption wick wire for the tin absorbing excess solder, sucking tin belt BGA desoldering braid soldering line, trusted brand with world-beating productivity.

Goot CP-1515 BGA Desoldering Braid Soldering Line Sucking Tin Belt For Mobile Phone Motherboard Welding Repair Wire

100% original GOOT WICK desoldering wicks , made in Japan

[ Optional Desoldering Wick ] :

• Option 1: CP-1515 Width: Approx. 1.5mm, 1.5M Length
• Option 2: CP-2015 Width: Approx. 2.0mm, 1.5MLength
• Option 3: CP-2515 Width: Approx. 2.5mm, 1.5MLength
• Option 4: CP-3015 Width: Approx. 3.0mm, 1.5MLength
• Option 5: CP-3515 Width: Approx. 3.5mm, 1.5MLength

Warning :

1. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
2. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.

How to Use :

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove both the desoldering wick and the soldering iron tip from the PCB after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.

Caution :

1. To prevent injury, do not touch the wicks directly while desoldering. Hold the case, or use tweezers, ect.
2. Do not force the tip against the desoldering wick, do not heat for more than 5 seconds to avoid hurting yourself or damaging parts and PCB.

Package includes :

• 1pcs x GOOT WICK Desoldering Wick

Other supplier products

	TBK-988N Built-in Dual Pump Vacuum Separator Machine For iPhone Repair	TBK-988Z Multi-function screen preheating separator with built-in double vacuum pump curved screen degumming mobile Pads tablets screen repair mac...
	5MP 2/3" F1.7Manual Iris 35mm Prime Lens	5MP F1.7 Manual IRIS 35mm Prime Lens, 2/3" Format Machine Vision Low distortion Lens For Industry 4.0 Security, Visual Recognition, Visual Identity...
	iDCSD 2nd gen UART Cable Type -C development Cables For New iPad Pro Used	Used iDCSD 2nd gen UART cable Type -C development cables For New iPad Pro,iDCSD UART Cable Type-C Development Cable 2nd gen For New iPad Pro UsedBr...
	Relife RL-20A 2mm Tin Suction Solder Wire PCB Welding Repair Tool	RELIFE RL-20A 2.0mm Tin suction solder wire, desoldering mesh braid. This copper soldering wick is for motherboard BGA PCB Tin planting/cleaning r...
	2 In 1 Alignment and Lamination Mold iPhone LCD Touch Screen Refurbish Mold	All in one green lamination mold for i X-12 Pro Max, green laminating mold with black pad for iPhone display screen repair. Mold size: 100*180*2...

Same products

	Microcrystalline wax used for rubber plastic processing and modification	Seller: Syntop chemical Co.,Ltd.	Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe...
	Microcrystalline wax 80A used for lubrication and demolding	Seller: Syntop chemical Co.,Ltd.	The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot...
	Tyvek Flat Roll Pouch	Seller: Hopeway AMD	Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli...
	Industrial Warehouse Ceiling Fans	Seller: Hebei Windmax Power Technology Co., Ltd.	Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logis...
	HVLS Ceiling Fan for Railway Station	Seller: Hebei Windmax Power Technology Co., Ltd.	HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa...