GOOT WICK Desoldering Wicks Original ESD Safe PCB Solder Wire

High-quantity 100% original GOOT desoldering wick with braided copper wire, saturated with non-chlorine special flux, can be used for precision PCB safely. CP-1015/1515/2015/2515/3015/3515 BGA desoldering wire solder wick except, sucking tin absorption wick wire for the tin absorbing excess solder, sucking tin belt BGA desoldering braid soldering line, trusted brand with world-beating productivity.

Goot CP-1515 BGA Desoldering Braid Soldering Line Sucking Tin Belt For Mobile Phone Motherboard Welding Repair Wire

100% original GOOT WICK desoldering wicks , made in Japan

[ Optional Desoldering Wick ] :

• Option 1: CP-1515 Width: Approx. 1.5mm, 1.5M Length
• Option 2: CP-2015 Width: Approx. 2.0mm, 1.5MLength
• Option 3: CP-2515 Width: Approx. 2.5mm, 1.5MLength
• Option 4: CP-3015 Width: Approx. 3.0mm, 1.5MLength
• Option 5: CP-3515 Width: Approx. 3.5mm, 1.5MLength

Warning :

1. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
2. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.

How to Use :

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove both the desoldering wick and the soldering iron tip from the PCB after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.

Caution :

1. To prevent injury, do not touch the wicks directly while desoldering. Hold the case, or use tweezers, ect.
2. Do not force the tip against the desoldering wick, do not heat for more than 5 seconds to avoid hurting yourself or damaging parts and PCB.

Package includes :

• 1pcs x GOOT WICK Desoldering Wick

Other supplier products

	JM-SK05 Heavy Suction Cup Duty Smart Phone Repair Opening Tool	JM-SK05 Heavy Duty Suction Cup Pry Puller Tool for Smart LCD Glass Screen Opening DisassemblyFeatures: Heavy duty suction cup, Used to remove a...
	Z3X Pro Box Samsung Android Phones Repair Flashing Unlock Tool	Z3X BOX is an ultimate flashing, mobile unlocking, repair IMEI and full service tool for Samsung and LG sOptional Version : Option 1: Z3X Box LG...
	3MP 4-12mm Varifocal Industrial Lens F1.4 1/2" Manual Iris CCTV Lenses	3MP C Mount 4-12mm Varifocal Industrial lens F1.4 1/2" Manual Iris CCTV Lenses For Security Camera Surveillance Lens, Low distortion Lens for Visua...
	Phone Screen Repair Fixture with Rotatable Fixing Clamp	PHONEFIX Adjustable Portable Phone Repair Holder with Rotatable Fixing Clamp for Phone Circuit Board Repair Disassembly ToolOption design for Phone...
	USB 3.0 1080P USB Webcam 50fps 2MP High Speed Camera	IMX291 Sony USB 3.0 Webcam, 50fps 2MP High Speed USB Camera for PC Computer with Manual Zoom Varifocal Lens webcam, Varifocal Lens USB Webcam USB H...

供应产品

Same products

	ETH Ethereum Jasminer X4 BRICK ASIC Miner	卖方: Shenzhen Dovina Electronic Co.,Ltd	Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ...
	ETH Ethereum Jasminer X4-1U ASIC Miner	卖方: Shenzhen Dovina Electronic Co.,Ltd	TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl...
	ETH Ethereum Jasminer X16 ASIC Miner	卖方: Shenzhen Dovina Electronic Co.,Ltd	Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ...
	ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner	卖方: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a...
	ETH Ethereum iPollo V1 Mini SE ASIC Miner	卖方: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe...