FPQ2W-10/3T20 10kV Pin Insulators
The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According to experience, a compression error of 0.05 mm may cause an error of more than 10% on the crimping strength. Therefore, the crimping process will focus on pressure, and determine the proper The crimping force; in order to reduce the influence of the mandrel and the material fluctuation of the fittings, it is assisted to control the amount of compression; the pressing speed should not be fast, and the fittings should be fully plastically deformed during the slow pressing process, and the holding time should not be too long , to prevent the mandrel from breaking, the best experience time is about 2s.
Specifications of FPQ2W-10/3T20 10kV polymer pin insulator
|
Type |
FPQ2W-10/3T20 |
|
Rated bent withstand load (kN) |
3 |
|
Height (mm) |
260 |
|
146 |
|
|
184 |
|
|
460 |
|
|
Downward bolt thread diameter (mm) |
20 |
|
Rated voltage (kV) |
10 |
|
The highest voltage of equipment (kV) |
12 |
|
1min power frequency wet withstand voltage not less than (kV) |
50 |
|
Full wave lightning impulse withstand voltage(peak value) not less than (kV) |
110 |
For more information about power line hardware, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Pin Insulators | Pin insulators are electrical insulators used to support low- and medium-voltage power lines. They are typically made of glass or porcelain materia... |
 |
Zinc Metal Oxide Varistor Disc for Surge Arresters | ZnO resistor is the core element of the lightning arrester. It mainly protects power system equipment by limiting lightning overvoltage to ensure t... |
 |
HV Disconnector | High Voltage (HV) Disconnectors are critical components used to isolate high voltage electrical equipment, such as transformers or transmission lin... |
 |
MOA Metal Oxide Varistor Surge Arresters | A metal oxide arrester (MOA) is an electrical device that is designed to protect electrical systems and equipment from surges caused by lightning, ... |
 |
Medium Voltage Surge Arresters | Medium-voltage surge arresters are electrical devices designed to protect electrical equipment from surges or transients that occur on medium-volta... |
Похожие товары
 |
MR PP-F600 PP Fork | Продавец: Shengtai Daily Plastics Products Limited Company | PP Fork-Reusable heavy duty cutleryin PP material. This heavy tableware is made of heat-resistan... |
 |
BIO-F360 6.5'' CPLA Fork | Продавец: Shengtai Daily Plastics Products Limited Company | BIO-F360 6.5inch/165mm 100% Compostable Forksare environmentally friendly, durable and heat resis... |
 |
Refractory Metals | Продавец: Beijing Huasheng Metal Materials Co., Ltd | Refractory Metals As one of the reliable refractory metal suppliers, Huasheng Metal are keeping ... |
 |
Battery Energy Storage Systems | Продавец: Shenzhen Worldpower Energy Storage Technology Co.,Ltd | Battery Energy Storage Systems (BESS) are cutting-edge technologies that store electrical energy ... |
 |
7 Inch (180mm) Flap Disc | Продавец: Keying Abrasives | KEYING manufactures Self-adhesive Disc, our production is about reprocessing jumbo rolls of SCM, ... |
