FPQ2W-10/3T20 10kV Pin Insulators
The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According to experience, a compression error of 0.05 mm may cause an error of more than 10% on the crimping strength. Therefore, the crimping process will focus on pressure, and determine the proper The crimping force; in order to reduce the influence of the mandrel and the material fluctuation of the fittings, it is assisted to control the amount of compression; the pressing speed should not be fast, and the fittings should be fully plastically deformed during the slow pressing process, and the holding time should not be too long , to prevent the mandrel from breaking, the best experience time is about 2s.
Specifications of FPQ2W-10/3T20 10kV polymer pin insulator
|
Type |
FPQ2W-10/3T20 |
|
Rated bent withstand load (kN) |
3 |
|
Height (mm) |
260 |
|
146 |
|
|
184 |
|
|
460 |
|
|
Downward bolt thread diameter (mm) |
20 |
|
Rated voltage (kV) |
10 |
|
The highest voltage of equipment (kV) |
12 |
|
1min power frequency wet withstand voltage not less than (kV) |
50 |
|
Full wave lightning impulse withstand voltage(peak value) not less than (kV) |
110 |
For more information about power line hardware, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Insulator Silicone Rubber | Insulator Silicone Rubber is one of the most widely used materials for insulating electrical equipment due to its excellent electrical insulating p... |
 |
Lightning Arrestor Resistors | The lightning thunder resistor for homeis the core part of the lightning arrester. It uses zinc oxide as the main component, adding a small amount ... |
 |
66kV Surge Arrester | When the communication cable or equipment is operating under normal operating voltage, the 66kV surge arresterwill not have an effect, and it is re... |
 |
Suspended Insulators | Suspended insulatorsare an integral component of high-voltage electrical systems. They are designed to carry and hold electrical conductors aloft a... |
 |
Hot Shrinkage Mould | The life of hot shrinkage mouldis closely related to the extruded material and extrusion ratio, and the life of the die and mandrel is greatly shor... |
Same products
 |
MR PP-F600 PP Fork | 卖方: Shengtai Daily Plastics Products Limited Company | PP Fork-Reusable heavy duty cutleryin PP material. This heavy tableware is made of heat-resistan... |
 |
BIO-F360 6.5'' CPLA Fork | 卖方: Shengtai Daily Plastics Products Limited Company | BIO-F360 6.5inch/165mm 100% Compostable Forksare environmentally friendly, durable and heat resis... |
 |
Refractory Metals | 卖方: Beijing Huasheng Metal Materials Co., Ltd | Refractory Metals As one of the reliable refractory metal suppliers, Huasheng Metal are keeping ... |
 |
Battery Energy Storage Systems | 卖方: Shenzhen Worldpower Energy Storage Technology Co.,Ltd | Battery Energy Storage Systems (BESS) are cutting-edge technologies that store electrical energy ... |
 |
7 Inch (180mm) Flap Disc | 卖方: Keying Abrasives | KEYING manufactures Self-adhesive Disc, our production is about reprocessing jumbo rolls of SCM, ... |
