.

FPQ2W-10/3T20 10kV Pin Insulators

The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According to experience, a compression error of 0.05 mm may cause an error of more than 10% on the crimping strength. Therefore, the crimping process will focus on pressure, and determine the proper The crimping force; in order to reduce the influence of the mandrel and the material fluctuation of the fittings, it is assisted to control the amount of compression; the pressing speed should not be fast, and the fittings should be fully plastically deformed during the slow pressing process, and the holding time should not be too long , to prevent the mandrel from breaking, the best experience time is about 2s.

Specifications of FPQ2W-10/3T20 10kV polymer pin insulator

Type

FPQ2W-10/3T20

Rated bent withstand load (kN)

3

Height (mm)

260

146

184

460

Downward bolt thread diameter (mm)

20

Rated voltage (kV)

10

The highest voltage of equipment (kV)

12

1min power frequency wet withstand voltage not less than (kV)

50

Full wave lightning impulse withstand voltage(peak value) not less than (kV)

110

For more information about power line hardware, please feel free to contact us!



Send product request

To: Guangdong Yufeng Industries Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Lightning Arrestor Resistors
Lightning Arrestor Resistors The lightning resistor for homeis the core part of the lightning resistor. It uses zinc oxide as the main component, adding a small amount of bismu...
Medium Voltage Surge Arresters
Medium Voltage Surge Arresters Medium-voltage surge arresters are electrical devices designed to protect electrical equipment from surges or transients that occur on medium-volta...
66kV Surge Arrester
66kV Surge Arrester When the communication cable or equipment is operating under normal operating voltage, the 66kV surge arresterwill not have an effect, and it is re...
Pin Insulators
Pin Insulators Pin insulators are electrical insulators used to support low- and medium-voltage power lines. They are typically made of glass or porcelain materia...
Cross Arm Insulators
Cross Arm Insulators horizontal post insulatorare used in electrical systems to provide insulation and mechanical support to the cross arm and conductor. They are typic...
All supplier products

Same products

Refractory Metals
Refractory Metals Seller: Beijing Huasheng Metal Materials Co., Ltd Refractory Metals As one of the reliable refractory metal suppliers, Huasheng Metal are keeping ...
Battery Energy Storage Systems
Battery Energy Storage Systems Seller: Shenzhen Worldpower Energy Storage Technology Co.,Ltd Battery Energy Storage Systems (BESS) are cutting-edge technologies that store electrical energy ...
7 Inch (180mm) Flap Disc
7 Inch (180mm) Flap Disc Seller: Keying Abrasives KEYING manufactures Self-adhesive Disc, our production is about reprocessing jumbo rolls of SCM, ...
FPQ2W-10/3T20 10kV Pin Insulators
FPQ2W-10/3T20 10kV Pin Insulators Seller: Guangdong Yufeng Industries Co.,Ltd The crimping process of polymer pin type insulatorsshould pay attention to the crimping force, co...
2'-Deoxyinosine
2'-Deoxyinosine Seller: WUHU HUAREN SCIENCE AND TECHNOLOGY CO., LTD. CAS No. 890 38 0 2 Deoxyinosine 2'-deoxyinosine, a fluorescent compound, is frequently used to ...