Connecting rod hardness vortex sorting machine LGYDFX-01
The connecting rod hardness eddy current testing machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital potentiometer is used to adjust the gain of the amplifier through program control. The gain parameters can be set for different battery chips, and the software working mode can be changed to adapt to various battery test applications without changing the hardware.
Features of the eddy current sorting machine:
- Detection of flaw detection: The workpiece to be tested shall be of the same specification. The instrument shall be calibrated with standard parts (work without damage), and the flaw detection curve on the display shall be adjusted to the upper limit and the intermediate standard point of the lower line. After calibration, Sort the workpiece for sorting.
Connecting rod hardness vortex sorting machine LGYDFX-01 Performance
|
Connecting rod condition |
same size, same heat treatment process state, the same material |
|
Sorting accuracy |
Brinell 20HB |
|
The form of probe |
1HB Brinell, Rockwell 0.1HRC |
|
Detection speed |
1200 pieces per hour (specific speed depends on the size of the workpiece under test) |
|
Work power supply |
AC 220V ± 10%, 50Hz |
|
Compressed air pressure |
5 — 8kgf/cm² |
|
Use environment |
temperature - 10 +40, relative humidity < 7.5%. |
|
Automation of equipment |
Manual charging, automatic detection, automatic sorting and automatic alarm |
As a non-destructive testing instrument and equipment, sensor development company, BKNTechnology has been an innovative manufacturer of high-quality, high-performance non-destructive testing instruments and equipment. We provide customer-centric design services to meet the different application needs of our users.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Drill Pipe Magnetic Flux Leakage Detector MFL-308 | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Institute ... |
 |
Application of Ndt Inspection Equipment | Application of Ndt Inspection Equipment Ndt inspection equipmentis widely used in industry, such as nuclear industry, weapon manufacturing, machin... |
 |
Steel Bar Testing | The steel bar is rolled by a rolling mill and produce both surface defects and internal defects during the rolling process. The internal defect is ... |
|
|
Connecting rod hardness vortex sorting machine LGYDFX-01 | The connecting rod hardness eddy current testing machine has a calibration device, input compensation parameters, automatic/manual temperature comp... |
 |
GTET-02 Cylinder Liner Eddy Current Testing Machine | GTET-02 Cylinder Liner Eddy Current Machine Introduction The rate of missed standard defect is 0%; the rate of false positives (only misidentifi... |
Похожие товары
 |
Hot Forging Of Steel Billets | Продавец: Chengdu Duolin Electric Co.,Ltd | Hot Forging Of Steel Billets Induction is refered to heat the metal part to forging temperat... |
 |
Lost Wax Casting Y Piece FlowSplit Fitting | Продавец: Qingtian Baoli Casting Co., Ltd. | Lost Wax Casting Y Piece FlowSplit Fittingis produced through the lost wax casting method, enabli... |
 |
Mini Nitrogen Generator | Продавец: 0000 | Mini Nitrogen Generator Mini Nitrogen Generator Are you looking for a reliable, cost-effe... |
 |
filter press in chemical industry | Продавец: 00000 | Our for Chemical Industry is designed to meet strict safety and environmental standards, en... |
 |
Laser Cutting Service China METAL FINISHING | Продавец: Dalian Zhuosheng Technology Co., Ltd | Laser Cutting Service ChinaMETAL FINISHING Laser Cutting Service ChinaMETAL FINISHING-China Da... |
