.

Connecting rod hardness vortex sorting machine LGYDFX-01

The connecting rod hardness eddy current testing machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital potentiometer is used to adjust the gain of the amplifier through program control. The gain parameters can be set for different battery chips, and the software working mode can be changed to adapt to various battery test applications without changing the hardware.

Features of the eddy current sorting machine:

  1. Detection of flaw detection: The workpiece to be tested shall be of the same specification. The instrument shall be calibrated with standard parts (work without damage), and the flaw detection curve on the display shall be adjusted to the upper limit and the intermediate standard point of the lower line. After calibration, Sort the workpiece for sorting.

Connecting rod hardness vortex sorting machine LGYDFX-01 Performance

Connecting rod condition

same size, same heat treatment process state, the same material

Sorting accuracy

Brinell 20HB

The form of probe

1HB Brinell, Rockwell 0.1HRC

Detection speed

1200 pieces per hour (specific speed depends on the size of

the workpiece under test)

Work power supply

AC 220V ± 10%, 50Hz

Compressed air pressure

5 — 8kgf/cm²

Use environment

temperature - 10 +40, relative humidity < 7.5%.

Automation of equipment

Manual charging, automatic detection, automatic

sorting and automatic alarm

As a non-destructive testing instrument and equipment, sensor development company, BKNTechnology has been an innovative manufacturer of high-quality, high-performance non-destructive testing instruments and equipment. We provide customer-centric design services to meet the different application needs of our users.



Send product request

To: Nanjing BKN Automation System Co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

BKNET-0102 Welded Pipe Eddy Current Flaw Detector
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle...
Eddy Current Testing Equipment for Tube, Bar and Wire
Eddy Current Testing Equipment for Tube, Bar and Wire Are you looking for eddy current equipment for sale? ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagneti...
Automatic EDM Notch
Automatic EDM Notch Automatic EDM Notchis a kind of EDM notch machine, and it is the ideal equipment for processing artificial defects of pipe rod standards in non-des...
GTET-02 Cylinder Liner Eddy Current Testing Machine
GTET-02 Cylinder Liner Eddy Current Testing Machine We have eddy current machine for sale! GTET-02 Cylinder Liner Eddy Current Testing Machine Introduction The rate of missed standard defect is 0...
Automatic EDM Notch  1024
Automatic EDM Notch 1024 Automatic EDM notch machineis the ideal equipment for processing artificial defects of pipe rod standards in non-destructive testing work. The flaw...
All supplier products

Same products

16Y-02B-00002 SHANTUI SD16 bulldozer parts
16Y-02B-00002 SHANTUI SD16 bulldozer parts Seller: Jining Skyline Machinery CO.,LTD ,
16Y-02A-00004 bolt
16Y-02A-00004 bolt Seller: Jining Skyline Machinery CO.,LTD , 接头 joint 齿轮 Gear Шестерня 接管 Tube 16Y-11-00011 导轮座 Seat 16L-80-00008 轴 shaft ...
16L-80-60000 SHANTUI 160HP bulldozer spare parts
16L-80-60000 SHANTUI 160HP bulldozer spare parts Seller: Jining Skyline Machinery CO.,LTD ,
16L-80-00026 SHANTUI SD16L bulldozer cutting blades
16L-80-00026 SHANTUI SD16L bulldozer cutting blades Seller: Jining Skyline Machinery CO.,LTD
16L-80-00015 SHANTUI bulldozer parts
16L-80-00015 SHANTUI bulldozer parts Seller: Jining Skyline Machinery CO.,LTD Hello, my company supplies SHANTUI machinery parts of bulldozer SD13/SD16/SD22/SD23/SD32/SD42, lo...