MFL-7389 Tube Magnetic Flux Leakage Detector

• 

Tubing repair is an important measure to reduce the comprehensive cost of production in oil production plants to improve the quality of repairing tubing. It can ensure the quality of oil and water wells to prolong the inspection cycle, reduce the rework of operations and reduce operating costs.

As an important process in the tubing repair test line, the flaw detection can accurately and effectively detect the defects in the manufacture and use of the inner and outer wall and the pipe body of the oil pipe to ensure the repair quality of the oil pipe.

Fundamental

When the detected tubing is saturated and magnetized, the magnetic field lines are distorted by the magnetic lines of force at the defect blocking defect, and a part of the magnetic lines leak out of the inner surface of the tube rod to form a leakage magnetic field, and the electromagnetic detecting method for detecting the leakage magnetic field by the detecting element is detected. Magnetic flux leakage inspection.

The leakage magnetic field picked up by the probe from the defect is amplified and converted into a digital signal, and then visually reflected by the flaw detector to the display to display the defect signal from the flaw detector, and directly determine the defect type and size of the detected tube rod.

¢73 and ¢89mm tubing eccentric wear and corrosion pits are detected, automatic detection, automatic alarm, automatic identification, automatic alarm.

BKN's new mfl tube inspectionhas high sensitivity to very small defects. It can effectively detect defects such as corrosion pits, eccentric wear on the inner wall of the tubing, thinning of tubing wall, etc.

Moreover, the testing speed is fast and pollution-free, and the detection is fully automated. The computer display screen is used to display the detection curve, automatic alarm, marking (defect of steel pipe), grading of tubing (grade I, II and scrap).

Другие товары поставщика

	GSET-551 Steel Wire Eddy Current Flaw Detector	GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signa...
	BKNET-0102 Welded Pipe Eddy Current Flaw Detector	Eddy current weld testing is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. ...
	Application of Ndt Inspection Equipment	Ndt inspection equipmentis widely used in industry, such as nuclear industry, weapon manufacturing, machinery industry, shipbuilding, petrochemical...
	Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02	During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d...
	Оборудование для вихретокового контроля для труб, проволоки	ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ...

Похожие товары

	Lost Wax Casting Y Piece FlowSplit Fitting	Продавец: Qingtian Baoli Casting Co., Ltd.	Lost Wax Casting Y Piece FlowSplit Fittingis produced through the lost wax casting method, enabli...
	Mini Nitrogen Generator	Продавец: 0000	Mini Nitrogen Generator Mini Nitrogen Generator Are you looking for a reliable, cost-effe...
	filter press in chemical industry	Продавец: 00000	Our for Chemical Industry is designed to meet strict safety and environmental standards, en...
	Laser Cutting Service China METAL FINISHING	Продавец: Dalian Zhuosheng Technology Co., Ltd	Laser Cutting Service ChinaMETAL FINISHING Laser Cutting Service ChinaMETAL FINISHING-China Da...
	Intake Manifold in Car Engine	Продавец: SDZ AUTO PARTS CO.,LTD	The car intake manifoldis a component of an automobile engine that supplies a mixture of air to d...