Grain Refiner
Grain Refiner
General Description of Grain Refiner
Grain refiner can optimize the form and grain distribution of eutectic silicon. The material synthetic mechanical properties, strength and ductility are enhanced. At same time, it can minimize hot cracking tendency.Control the structure and dispersion of individual crystals in metals improved mechanical strength and soundness of the casting.
SpecificationofGrain Refiner
|
Product |
composition |
Form |
|
|
AlTiC |
3% Titanium 0.15%C |
cut rod/coiled rod/cast cut bar/waffle ingot |
|
|
3% Titanium 0.3%C |
|||
|
5% Titanium 0.15%C |
|||
|
5% Titanium 0.3%C |
|||
|
AlTi |
AlTi |
4% 5% 6% 10% 15% Titanium |
Ingot/rod |
|
AlTiB |
AlTi10B1 |
10%Titanium 1%Boron |
Waffle ingot/rod/coil |
|
10%Titanium 0.4%Boron |
|||
|
AlTi5B1 |
5%Titanium 1%Boron |
||
|
5% Titanium 0.2% Boron |
|||
|
5% Titanium 0.6% Boron |
|||
|
AlTi3B1 |
3% Titanium 1% Boron |
||
|
3% Titanium 0.4% Boron |
|||
|
3% Titanium 0.2% Boron |
|||
|
AlP |
4%P |
waffle ingot |
|
|
AlZr |
4% 5 % 6%10%15%Zr |
waffle ingot |
|
|
AlSb |
5%/10%Sb |
waffle ingot |
|
Advantage of Grain Refiner
Improve the strength and toughness of aluminum alloy.
Eliminate columnar grains and feathery grains.
Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation.
Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility
Reduce surface defects of aluminum product by improving its ductility.
Improve calendaring rate and productivity on the premise of ensuring the quality of products.
Increase the using time of the calendaring molds and auxiliary equipment on the premise of ensuring the quality of products.
Make the grainrefiner foraluminummore beautiful by improving the surface treatment of aluminum product
Application of Grain Refiner
Hardeners: Used for enhancing physical and mechanical properties of metal alloys.
Grain Refiners: Used for controlling the dispersion of individual crystals in metals to produce a finer and more uniform grain structure; grain refiners in aluminum alloy castings
Modifiers & Special Alloys: Typically used to increase strength, ductility and machinability.
Using method of Grain Refiner
Baking before using
Operation temperature 680-720 ℃
Joint quantity: Self controlled by calculation and test according to actual condition.
Joint method: After digging up the drum. Plunge the additives slightly to the Al liquid and mix evenly. Keep immersing for 5-10 minutes.
Storage of Grain Refiner
If stored in low humidity environment in the original packing, product can be preserved for a long time.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Recovery Flux | Application: mainly used for primary aluminium ,aluminium alloy and secondary aluminium. It can be used for remove the floating dross on the surfac... |
 |
Magnesium Chloride Hexahydrate Powder | Magnesium Chloride Hexahydrate Powder General Description of Magnesium Chloride Hexahydrate Powder Chemically, magnesium chloride is represented as... |
 |
Granulated Fused Refining Fluxes | General Introduction: SATA is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, ... |
 |
Sodium free refining flux | General Description: Aluminum alloys containing more than 2 % magnesium become brittle with sodium. Sodium free refining fluxFeature: This flux is ... |
 |
Cover Flux | Cover Flux(SATA-PF-340) General Description of Cover Flux (SATA-PF-340) The aluminium melt is extremely easy oxidation and inhale when it is in mel... |
Похожие товары
 |
Китайская машина для обжатия с горячим каналом GT-JYH12 (с ЧПУ) | Продавец: Чжаосин-гуретт технолоджис лимитед | Описание Машина для обжатия с горячим каналом GT-JYH12 предназначена преимущественно для обжат... |
 |
Китайская машина для обжатия труб GT-JY18 на 18 позиций | Продавец: Чжаосин-гуретт технолоджис лимитед | Описание Машина для обжатия трубчатых нагревателей GT-JY18 (18 позиций) является популярной мо... |
 |
Multiple Blades Digital Label Cutter VR350 | Продавец: WILLIAM CNC TECHNOLOGY | Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq... |
 |
Digital Label Die Cutting Machine VR240X | Продавец: WILLIAM CNC TECHNOLOGY | Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th... |
 |
Rotary die cutting machine VR320 | Продавец: WILLIAM CNC TECHNOLOGY | Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ... |
