Reasons Why the Feeder Affect the Pick and Place Efficiency of the SMT Pick and Place Machine

• 

The influence of the feeder on the pick and place efficiency of the SMT feeder pick and placemachine is mainly concentrated on the abnormal power supply. The drive mode of the feeder is motor drive, mechanical drive and cylinder drive. Here, the mechanical drive is taken as an example to illustrate the influence of the feeder on the pick and place efficiency of the pick and place machine.

Generally, the maintenance of the feeder of the SMT pick and place machine is easy to be ignored, but regular cleaning and lubrication are essential tasks.

The feeding mechanism is mechanically driven by the cam main shaft to quickly tap the striker arm of the feeder. Through the connecting rod, the connected ratchet wheel drives the component tape to advance by one feed pitch, and at the same time drives the plastic take-up reel to peel the plastic strip on the tape, and the suction nozzle is lowered to complete the pick-up action.

However, due to the high-speed access of the feeding mechanism to the feeder stol, after a long period of use, the pawl of theSMT pick and place machinefeeder is severely worn, causing the pawl to fail to drive the plastic strip of the take-up reel to peel normally and making the suction nozzle unable to complete the pick-up work.

Therefore, the feeder smt machineshould be carefully checked before installing the tape. The feeder with a worn-out pawl wheel should be repaired immediately, and the one that cannot be repaired should be replaced in time.

In terms of SMT pick and place smt machine feeder, due to long-term use or improper operation by the operator, the press belt cover, needle, spring and other moving mechanisms are deformed, rusted, etc., which will cause the deviation of sucking components, warping of components or failure to suck the components, so it should be check regularly and problems should be dealt with in time if found, so as not to cause a lot of waste of components.

At the same time, when we are installing the feeder of SMT pick and place machine, it should be correctly and firmly installed on the feeder platform, especially the height detection equipment of feeder, otherwise it may cause the feeder or even the machine to be damaged.

As one of smt equipment manufacturers, we have types of small smt pick and place machinefor sale, if you have needs, please contact us.

Другие товары поставщика

	Reasons Why the Feeder Affect the Pick and Place Efficiency of the SMT Pick and Place Machine	The influence of the feeder on the pick and place efficiency of the SMT feeder pick and placemachine is mainly concentrated on the abnormal power s...
	STENCIL PRINTER	The types of SMT printer machineare divided into three parts: 1. Manual printing table 2. Semi-automatic solder printer machine 3. Fully automatic ...
	Electric Feeder	The electric smt feedersis mainly suitable for the Trosntol A1 automatic pick and place machine. This kind of pick and place feederonly needs elect...
	4th Floor, Building 5, No. 2, Huayi Road, Yuhang Street, Yuhang District, Hangzhou, China	Reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are...
	SMT Equipment in IOT	With the popularity of the Internet of Things (IOT), life has become intelligent. The Internet of Vehicles, smart home systems, various communicati...

Похожие товары

	45KW 1-20KHZ IGBT solid-state Medium Frequency Generator/ Induction Heating Power	Продавец: Dongguan Hitfar Power Technology Co., Ltd	45KW 1-20KHZ IGBT solid-state Medium Frequency Generator/ Induction Heating Power Descriptions ...
	70kw 1-20KHZ MF Generator/Medium Frequency Induction Heating Machine	Продавец: Dongguan Hitfar Power Technology Co., Ltd	70kw 1-20KHZ MF Generator/Medium Frequency Induction Heating Machine (Water Cooling) Description...
	90kw 1-20KHZ MF Generator, Medium Frequency Induction Heating Machine	Продавец: Dongguan Hitfar Power Technology Co., Ltd	90kw 1-20KHZ MF Generator, Medium Frequency Induction Heating Machine (Water Cooling) Descriptio...
	Китайская вальцовочная машина GT-DG250	Продавец: Чжаосин-гуретт технолоджис лимитед	• Описание Машина для вальцовки труб GT-DG250 использует пару вальцующих узлов, а также ряд ...
	Double Spindle Lathe NL251D	Продавец: Lecn Anhui Co., Ltd	A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ...