Reasons Why the Feeder Affect the Pick and Place Efficiency of the SMT Pick and Place Machine
The influence of the feeder on the pick and place efficiency of the SMT feeder pick and placemachine is mainly concentrated on the abnormal power supply. The drive mode of the feeder is motor drive, mechanical drive and cylinder drive. Here, the mechanical drive is taken as an example to illustrate the influence of the feeder on the pick and place efficiency of the pick and place machine.
Generally, the maintenance of the feeder of the SMT pick and place machine is easy to be ignored, but regular cleaning and lubrication are essential tasks.
The feeding mechanism is mechanically driven by the cam main shaft to quickly tap the striker arm of the feeder. Through the connecting rod, the connected ratchet wheel drives the component tape to advance by one feed pitch, and at the same time drives the plastic take-up reel to peel the plastic strip on the tape, and the suction nozzle is lowered to complete the pick-up action.
However, due to the high-speed access of the feeding mechanism to the feeder stol, after a long period of use, the pawl of theSMT pick and place machinefeeder is severely worn, causing the pawl to fail to drive the plastic strip of the take-up reel to peel normally and making the suction nozzle unable to complete the pick-up work.
Therefore, the feeder smt machineshould be carefully checked before installing the tape. The feeder with a worn-out pawl wheel should be repaired immediately, and the one that cannot be repaired should be replaced in time.
In terms of SMT pick and place smt machine feeder, due to long-term use or improper operation by the operator, the press belt cover, needle, spring and other moving mechanisms are deformed, rusted, etc., which will cause the deviation of sucking components, warping of components or failure to suck the components, so it should be check regularly and problems should be dealt with in time if found, so as not to cause a lot of waste of components.
At the same time, when we are installing the feeder of SMT pick and place machine, it should be correctly and firmly installed on the feeder platform, especially the height detection equipment of feeder, otherwise it may cause the feeder or even the machine to be damaged.
As one of smt equipment manufacturers, we have types of small smt pick and place machinefor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
STENCIL PRINTER | The types of SMT printer machineare divided into three parts: 1. Manual printing table 2. Semi-automatic solder printer machine 3. Fully automatic ... |
 |
Pick and Place Machine TronStol 3V Advanced | Tabletop SMT Pick And Place Machine This kind of SMT table top smt pick and place machinefeatures a dual head, 46 feeder slots, vision system, a... |
 |
Pick and Place Machine | The pick and place machine is the equipment used to achieve high-speed and high-precision placement of components in the production line, it is con... |
 |
ACCESSORIES | The entire SMT production line generally requires conventional SMT pick and place parts: nozzles, feeders, etc. For all products in the warranty, o... |
 |
Electric Feeder | The electric smt feedersis mainly suitable for the Trosntol A1 automatic pick and place machine. This kind of pick and place feederonly needs elect... |
Same products
 |
Chinese GT-DG250 Rolling Machine | Seller: Zhaoqing City Greater Technology Co., Ltd | * Description GT-DG250 Rolling machine uses a pair of rolling assemble on the machine, and with ... |
 |
Double Spindle Lathe NL251D | Seller: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Seller: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Seller: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
