GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Q150: split core 150mm 3000/5A current transformer clamp | The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device... |
 |
D20: voltage output 200A AC/DC CURRENT PROBE | The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a rechargeable multimeter battery or from a 9 V powe... |
 |
GF3000 STATIONARY MULTI STATIONS POWWER METER TEST BED | The GF3000 series stationary three phase energy meter test bench is a fully automatic system that enables simultaneous, multi-position calibration ... |
 |
Q13: MA output 100A AC clamp on current probe | The Q13 clamp on current probe is a high accuracy mini probe for measurements to 120A AC.It can output 1mA/A, 1mV/A or 10mV/A etc. The Q13 Series c... |
 |
GF302D3 PORTABLE 3-PHASE ENERGY METER TEST BENCH | GF302D3是一款功率计测试台，主要用于实验室或现场测量。仪器测量范围更广0-600V和0-120A，精度0.02%，有0.02%、0.05%、0.1%三档可选。特点： 1．可用于实验室或现场 2．精度：0.02% 3．带电源 4．可测量机械表和智能表 5．重量轻、便携 |
Похожие товары
 |
330037 Communication Unit Change-Over Table HS50 Original Used | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Robot Mobile Screen Protector Making Machine Parts CP40 N045 Nozzle NXT III H08M 10.0 Nozzle RM A... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected w... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | This GF6018A high precision multi-product calibrator is compliance with national verification reg... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | Продавец: 782364 | APPLICATION ■ Power plant; ■ Universities; ■ Panel manufacturer; ■ Research institutes; ■ Electr... |
