GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power meter and resistance meter verification rules" and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
Send product request
Other supplier products
 |
Q40:high performance 500A AC current clamp CT sensor | The Q40 Series AC Current clamp ct sensor are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low ... |
 |
FQ-RCT02:6000A flexible ROGOWSK coil current sensor | The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil. It is suitable for large current measuring. They... |
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
GF112B ONE-PHASE WATT-HOUR METER CALIBRATOR | GF112B single phase electricity meter calibrator is suitable to test various types single phase electricity meters error on site and also can be us... |
 |
P8:wholesale economic type 5A AC current clamp CT | This current clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC current clamp ct is a cheap a... |
Same products
 |
5MWh Energy Storage System | Seller: Hebei Jingye New Energy Technology Co., Ltd. | 5MWh Energy Storage System Battery Technology: Utilizes mature, high-efficiency, long-life l... |
 |
417KWH Energy Storage System | Seller: Hebei Jingye New Energy Technology Co., Ltd. | 417KWH Energy Storage System High Energy Density: Utilizes 314Ah high-energy density cells. ... |
 |
261KWH Energy Storage System | Seller: Hebei Jingye New Energy Technology Co., Ltd. | 261KWH Energy Storage System High Energy Density: Utilizes 314Ah high-energy density cells. ... |
 |
C&I Energy Storage Systems | Seller: Hebei Jingye New Energy Technology Co., Ltd. | C&I Energy Storage Systems New Energy’s Commercial & Industrial (C&I) Ener... |
 |
Electrical Energy Storage Systems | Seller: Hebei Jingye New Energy Technology Co., Ltd. | Electrical Energy Storage Systems New Energy is a leading provider of advanced energy storag... |
