P18: 200A double ratio voltage output AC current clamp
The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P18 clamp ct has an integral 2.5m lead terminated. FEATURES Holding wire diameter: φ18mm; Frequency 10Hz-2MHz Bandwidth; High times harmonic measurement; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; Improved ergonomic design & easy operation; High precision 0.1% for current measurement; Basic parameters : Ratio:1000:1 or 2000:1 (customized) Accuracy class:0.1%, 0.2% Primary current:0 - 10A AC and 0-200A AC Secondary current:0 - 100mA AC and 0 - 200mA AC Load capacity:≤20Ω, standard 4Ω Frequency range:10Hz-2MHz Max. jaw opening (mm):18
Другие товары поставщика
|
|
GF312D1 HANDHELD 3-PH ELECTRICITY METER CALIBRATOR |
GF312D1 is a handheld three-phase kWH meter calibrator.It mainly used on site. It has portable design and it can work 10 hours continuously when us... |
|
|
Q50A:1000A/1A wide range measuring AC current probe |
The model Q50A current probe is designed for fast and easy measure the current in industrial and power environment. It has wide range of current me... |
|
|
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR |
DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification s... |
|
|
GF112D 1-PHASE ELECTRICITY METER TESTER |
TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-phase power meter on spot. It can test harmonic,power... |
|
|
пожалуйста |
GF112D является 0,05, 0,1 или 0,2, Из-за того, что вы сказали, что у вас проблемы с самооценкой? И я не могу просто так взять и уйти. apparent powe... |
Все товары поставщика
Похожие товары
