Plastic Insulation Control Cable used to connect electric and instrument
This product is used for the connecting wire of electric and instruments in power distribution equipments, playing a part in power transmission. PVC insulated control cable rated voltage 450/750V.
Другие товары поставщика
|
|
40.5/72.5/126/145/170 Series three columns horizontally-rotary double contact break HV disconnector |
GW7F three-post horizontal double-clearance revolving outdoor three-phase high-volt-age AC disconnector, rated frequency 50Hz, rated voltage 252kV,... |
|
|
66-550kv YJLW02 longitudinal water-proof XLPE power cable |
1 Standard 1) Conductive core(800mm2 and the below is tightening circle, the above is cutting structure) 2) The shielding layer of the conduct... |
|
|
Design, Supply, Erection, Testing & Commissioning of 230/132kV GIS Substation on Turnkey Basis (EPC) contractor |
Shandong Taikai Power Engineering Co.,Ltd (hereinafter referred to as TKPE), located at the foot of mountain Tai, subordinated to Taikai Group, is ... |
|
|
PVC Insulation Power Cable up to 450/750V |
1 Standard IEC60502-1997 and GB/T12706-2002 2 Characteristics 1) Highest rated temperature of cable conductor is 70℃. 2) Highest temperatur... |
|
|
KYN61-40.5kv Metal clad Movable MV Switch panel |
The enclosure is assembled after bending the aluminum-zinc steel-sheet which connected via high-strength bolts and riveting nuts, with panel spray ... |
Все товары поставщика
Похожие товары
