BMC, SMC, GRP, GFK Roof Tiles
Aobang composite roofing tiles is divided into: BMC roofing tiles, SMC roofingtiles, GRP roofing tiles, GFK roofing tiles.
Due to the excellent properties of BMC, SMC, GRP, GFK materials, it is the best choice for making roof tiles. BMC, SMC, GRP, GFK material is a composite material, mixed with polyester resin, chemical and mineral fillers, technical agents, usually reinforced with fiberglass. It is an excellent material for outdoor applications. It has weather resistance and UV stability and has a service life of more than 30 years in outdoor environments. It absorbs almost no moisture, so it can isolate the moisture from the outdoors to the room. It is water and chemical resistant so acid rain does not affect the surface of the roof. Colors are easily mixed into the BMC, SMC, GRP, GFK materialas a pigment, so colored tiles can be easily obtained and the color does not disappear during its lifetime.
BMC, SMC, GRP, GFK materials are also fire resistant. If there is no source of burning material around it, it will not spread and will immediately go out. Light weight and high strength are one of the biggest advantages of BMC, SMC, GRP, GFK materials. This material has a density of 1.7-2.0. It makes the tiles very light. Transportation costs, installation costs, etc. can be reduced. this materials make your roof tiles more colorful, longer lasting and more cost effective.
Advantage: Light weight, high strength, aging resistance, UV protection, acid and alkali resistance, waterproof and moisture proof, no fading, low thermal conductivity and energy saving.
Aobang technology limitedhas a technical team engaged in many years of production and R&D, and has the industry-leading expertise and technical level. We are dedicated to meeting the needs of our customers and highlighting the value that is given to our customers.To learn more about bulk molding compound manufacturing, please contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Flange Molding | mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Sinc... |
 |
SMC/BMC Antenna Reflector | High precision, high efficiency, and high gain The most important job of using smc/bmcfor the manufacture of antennas is to fully exploit its fe... |
 |
Flange Molding | Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset composite can be reprocessed. With high ... |
 |
BMC, SMC, GRP, GFK Ceiling | Ceiling is a kind of decoration on the top of living environment. In short, it refers to the ceiling decoration, is an important part of interior d... |
 |
Insulation Board Mold Description | SMC and BMC compositematerials deliver top performance for electric industry. Plastic molded electric products subject to electrical arcing or trac... |
