CARBIDE ROLLER

• 

Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore, the cemented carbide roller is more resistant to corrosion, cold fatigue and hot fatigue than the tool steel roller.

According to the structure, cemented carbide rollerrings(tungsten carbide roller) can be divided into solid cemented carbide roll rings and combined cemented carbide roll rings. The solid cemented carbide roll has been widely used in the frame of pre-finishing rolling and finishing rolling (including the sizing and reducing frame, pinch roll frame) of high-speed wire rod mill. The combined cemented carbide roll is composed of cemented carbide and other materials, there are combined carbide roll rings and combined carbide rolls. The combined cemented carbide roll ring is installed on the roll shaft, while the combined cemented carbide roll directly casts the cemented carbide roll ring in the roll shaft to form a whole, which is applied to the rolling mill with large rolling load.

Xiamen Betalent Carbide Co.,Ltd is acarbide products inc, focus on designing, producing and selling tungsten carbide productsand cemented carbide products, want to know more? Please contact us.

Другие товары поставщика

	CARBIDE STRIPS	Tungsten carbide stripsare referring the rectangular tungsten carbide rod, also known as tungsten carbide flats.It is produced by the same way as c...
	CARBIDE ROD	Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91....
	TAPER END MILL	The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end m...
	CARBIDE ROLLER	Due to the high thermal conductivity of the cemented carbide, carbide rollerhas good heat dissipation, which shortens the time of the roll surface ...
	CEMENTED CARBIDE	Cemented carbide materialis a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy pr...

Похожие товары

	CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS	Продавец: ZK Electronic Technology Co., Limited	Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
	Конденсатор EEF-CX0J101R PANASONIC SMD SPEC полимер 100UF 6,3v SMD LF	Продавец: ZK Electronic Technology Co., Limited	Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
	Heavy Copper PCB Manufacturer	Продавец: Xinfeng Huihe Circuits Co., Ltd.	Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
	8 Layer ENIG Half Hole Custom PCB	Продавец: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
	4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board	Продавец: Xinfeng Huihe Circuits Co., Ltd.	Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...