CARBIDE ROLLER
Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore, the cemented carbide roller is more resistant to corrosion, cold fatigue and hot fatigue than the tool steel roller.
According to the structure, cemented carbide rollerrings(tungsten carbide roller) can be divided into solid cemented carbide roll rings and combined cemented carbide roll rings. The solid cemented carbide roll has been widely used in the frame of pre-finishing rolling and finishing rolling (including the sizing and reducing frame, pinch roll frame) of high-speed wire rod mill. The combined cemented carbide roll is composed of cemented carbide and other materials, there are combined carbide roll rings and combined carbide rolls. The combined cemented carbide roll ring is installed on the roll shaft, while the combined cemented carbide roll directly casts the cemented carbide roll ring in the roll shaft to form a whole, which is applied to the rolling mill with large rolling load.
Xiamen Betalent Carbide Co.,Ltd is acarbide products inc, focus on designing, producing and selling tungsten carbide productsand cemented carbide products, want to know more? Please contact us.
Send product request
Other supplier products
 |
2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER | 2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18mm Grade BT55 Shank dia. 1... |
 |
PCB DRILL BIT | PCB（Printed Circuit Board）, also called printed circuit board. It is glued together by several layers(4 layers, 6 layers or 8 layers) of resin mate... |
 |
CENTER DRILL BIT | Center finder drill bitis a common tool in machining, which plays an important role in actual production. The first application of center drill was... |
 |
CARBIDE STRIPS | Carbide flatsare referring the rectangular tungsten carbide rod, also known as tungsten carbide strips.It is produced by the same way as carbide ro... |
 |
THREADING INSERT | Betalent carbide threading insertselection tips: 1, Internal threading or external threading. 2, The profile and pitch of workpiece thread. There ... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | Seller: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | Seller: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | Seller: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Seller: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
