Metal Wire Gauze Structured Packing
Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arranged wire mesh pieces pressed into corrugation. Obliquity of corrugation is 45° or 60° and the neighbor two pieces are of opposite directions. When filling into the column, upper and lower filling trays cross by 90. It has advantages of high effectiveness, low pressure drop and large flow rate. This product includes BX, CY types, generally used in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.
The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads along with its low pressure drop and small liquid hold-up, making it very suitable for distillation of thermally sensitive products.
Specification
Surface areas: 250 m2/m3, 500 m2/m3, 750 mm2/m3, 1000 m2/m3, 1200 m2/m3.
Material: AISI304, AISI304L, AISI316, AISI316L, carbon steel, etc.
Feature
Large specific surface area, high void ratio and light.
Obliquity of gas passage is small and regular, so pressure drop is low.
Good radial diffusion and sufficient gas contact.
Application
Metal wire gauze packing is used for Fine chemical, flavors factory, isomer separation. The separation of thermally sensitive materials, testing tower and the improvement of tower.
250（AX） Precision rectification for high productive capacity and less theoretical plate number.
500（BX） Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa .
700（CY） Separation of isotopic compound and isomeric compound.
Wire gauze structured packing is not suitable for fouling services and strongly corrosive media.
Другие товары поставщика
|
|
Knitted Structured Packing |
Knitted structured packing is suited for applications that demand high separation efficiency with a lower pressure drop. The packing is made from ... |
|
|
Sheet Metal Packing |
Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated laye... |
|
|
Metal Perforated Plate Corrugated Packing |
Metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal... |
|
|
Metal Plate-net Corrugated Packing |
Metal plate-net corrugated packing is punched lot of diamond-shaped tiny holes at metal thin slab. Then drawn the plate to appointed specification.... |
|
|
Expanded Metal Prick Corrugated Plate Packing |
Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It... |
Все товары поставщика
Похожие товары
