Metal Wire Gauze Structured Packing

Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arranged wire mesh pieces pressed into corrugation. Obliquity of corrugation is 45° or 60° and the neighbor two pieces are of opposite directions. When filling into the column, upper and lower filling trays cross by 90. It has advantages of high effectiveness, low pressure drop and large flow rate. This product includes BX, CY types, generally used in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.

The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads along with its low pressure drop and small liquid hold-up, making it very suitable for distillation of thermally sensitive products.


Specification

Surface areas: 250 m2/m3, 500 m2/m3, 750 mm2/m3, 1000 m2/m3, 1200 m2/m3.
Material: AISI304, AISI304L, AISI316, AISI316L, carbon steel, etc.


Feature

Large specific surface area, high void ratio and light.
Obliquity of gas passage is small and regular, so pressure drop is low.
Good radial diffusion and sufficient gas contact.
Application

Metal wire gauze packing is used for Fine chemical, flavors factory, isomer separation. The separation of thermally sensitive materials, testing tower and the improvement of tower.
250(AX) Precision rectification for high productive capacity and less theoretical plate number.
500(BX) Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa .
700(CY) Separation of isotopic compound and isomeric compound.
Wire gauze structured packing is not suitable for fouling services and strongly corrosive media.




Send product request

To: Boegger Industrial Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Expanded Metal Prick Corrugated Plate Packing
Expanded Metal Prick Corrugated Plate Packing Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It...
Metal Plate-net Corrugated Packing
Metal Plate-net Corrugated Packing Metal plate-net corrugated packing is punched lot of diamond-shaped tiny holes at metal thin slab. Then drawn the plate to appointed specification....
Sheet Metal Packing
Sheet Metal Packing Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated laye...
Metal Perforated Plate Corrugated Packing
Metal Perforated Plate Corrugated Packing Metal perforated plate corrugated packing is made from perforated plate with channel corrugation on surface, and remains structure feature of metal...
Metal Structured Packing
Metal Structured Packing Specification Material: Stainless Steel 304, 304L, 316, 316L, 410, Carbon Steel. Type: 125X/Y, 250X/Y, 350X/Y, 500X/Y, 700X/Y. The metal packing i...
All supplier products

Same products

Gas Pressure Sintering Furnace
Gas Pressure Sintering Furnace Seller: Advanced Corporation for Materials&Equipments Gas pressure sintering furnace is mainly used for vacuum sintering and pressure sintering of Sic,...
Vertical Vacuum Graphitization Furnace
Vertical Vacuum Graphitization Furnace Seller: Advanced Corporation for Materials&Equipments Vertical vacuum graphitization furnace is mainly used for high temperature graphitization treatme...
SHX sries circulating fluidized bed steam boiler
SHX sries circulating fluidized bed steam boiler Seller: Wuxi Zozen Boilers Co., Ltd.
 DZL series coal-fired steam boiler
DZL series coal-fired steam boiler Seller: Wuxi Zozen Boilers Co., Ltd.
DHL series steam boiler
DHL series steam boiler Seller: Wuxi Zozen Boilers Co., Ltd.